DLS & DLSC Lasers
Back to Lasers
|
StockerYale's Lasiris DLS and DLSC lasers produce focusable, high quality beams, perfect for alignment and aiming applications. The DLS projects an elliptical spot having a 1:3 ratio of the minor to major axis. For certain applications, a circular beam is more effective, since the optical performance of a system of lenses is optimized when the beam is round. For such uses, the DLSC is available, projecting a diffraction-limited circular beam that does not require shape correction with a series of lenses.
Lasiris DLS and DLSC lasers can replace HeNe lasers in many applications. They offer the same high reliability found in our well-known SNF series. The lasers have fully protected diode electronics, complete with passive internal heat dissipation, a rugged housing, and reverse-polarity, over-voltage, over-temperature and ESD protection.
Mechanical Specifications
| Weight | DLS: 54 g; DLSC: 60 g |
| Housing material | Black anodized aluminum |
Optical Specifications
| Output power | 1 to 150 mW, varies with model |
| Wavelength | 635 to 1550 nm, varies with model |
| Bore sighting | < 3 mrad |
Environmental Specifications
| Operating Temperature | -10°C to +48°C |
| Wavelength drift | 0.25 nm/°C typical |
| Input voltage | 5 - 6 VDC Optional, 9,12,24 VDC, 115/220 VAC |
| Connector type | Male phono-jack 3.5 mmf |
| Cable length | 20 in. standard, customizable |
| Slow start time delay | 10 µsec |
| Reverse-polarity protection | Built-in |
| Over-temperature protection | Built-in: 48°C |
| Over-voltage protection | Built-in |
Available Models
|
|
||||||||||||||||||||||||||||||||||||||||
