AT logo - The Machine Vision Specialists  
  Cameras  
  Frame Grabbers  
  Lenses  
  Lighting  
  Software  
  Vision Systems  
  Accessories  
  News  
  Careers  
  Contact AT  
  Site Map  

Machine Vision Newsletter

Contact:
info@adeptturnkey.com.au


Perth:
(08) 9242 5411

Sydney:
(02) 9905 5551

Melbourne:
(03) 9384 1775



Defence Recognised Supplier Scheme Logo
 

Camera Link Frame Grabbers cards
Back to Frame Grabbers

Camera Link

Camera Link is a high speed serial that has lead the way for Machine Vision technology by dramatically increasing image transfer speeds allowing for a faster image processing. Camera Link has been developed specifically for Machine Vision and Image Acquisition. The Camera Link interface simplifies camera integration - control, and cabling use a standard interface

Model Pixel Clock Number of cameras Length Host Bus Camera Interface
Teledyne Dalsa          
PC2-CamLink Up to 66 MHz 1 Half PCI-32 1 Base Camera Link
X64-CL Express Up to 85 MHz 2 Half PCle x 1 2 Base/1 Medium Camera Link
X64-CL Full Up to 85 MHz 1 Half PCI-64/PCI-X 66 1 Base/ Medium or full Camera Link
X64-CL iPro Up to 85 MHz 2 Half PCI-64/PCI-X 66 2 Base/1 Medium Camera Link
Xcelera-CL LX1 Base Up to 85 MHz 1 Quarter PCle x 1 Base Camera Link
Xcelera-CL PX4 Dual Up to 85 MHz 2 Half PCle x 4 2 Base/1 Medium Camera Link
Xcelera-CL PX4 Full Up to 85 MHz 1 Half PCle x 4 1 Base/Medium or full Camera Link
Xcelera-CL PX4 SE Up to 85 MHz 1 Half PCle x 4 1 Base, Medium, full Camera Link
Xcelera-CL PX8 Dual 20 to 85 MHz 2 Half PCle x 8 1 Base/1 Medium Camera Link
Xcelera-CL PX8 Full 20 to 85 MHz 1 Half PCle x 8 1 Base, Medium or full Camera Link
Xtium-CL PX4 up to 85 MHz 2 Half PCIe Gen2 x4 1 Full, 80-bit (Deca), Med, Base or 2 Base
Xtium-CL MX4 up to 85 MHz 2 Half PCIe Gen2 x4 1 Full, 80-bit (Deca) or Medium Camera Link or 2 Base Camera Link
Xtium-CLHS PX4 up to 85 MHz   Half PCIe Gen2 x4 • CLHS 1 to 7 lane configurations
• Single CX4 cable input from camera
• Support for CLHS acquisition trigger modes 1 through 4
Xtium-CLHS PX8 up to 85 MHz   Half PCIe Gen2 x8 • CLHS 1 to 7 lane configurations
• Single CX4 cable input from camera
• Support for CLHS acquisition trigger modes 1 through 4

 

If you are uncertain as to which Camera Link grabbers to use, please contact one of our Vision Engineers today and receive specialist advice on the optimal CameraLink board for your application.

For more information on CameraLink frame grabbers or to purchase, please Contact Us.

 

If you like this page, please recommend it and share it.

Google+ Facebook Twitter More