|
|
Multi-sensor 2CCD, 3 CCD cameras, 3CMOS and 4CCD camera
technology is suitable for high-speed applications such as circuit and
electronic/mechanical parts inspection, food/fruit sorting, printing and
other high-end applications. Multi-sensor cameras feature precisely-aligned
image sensors to produce the highest possible colour fidelity in combination
with a high line rate.
| 2CCD Cameras |
|
|
|
|
| 2CCD video cameras combine two
images to produce high quality results in vision applications that
are not possible with standard cameras. Applications for 2CCD cameras
include fruit and vegetable inspection, simultaneous inspection of
packaging and content, textile defect detection, aerial mapping, print
quality inspection and many others. |
| Model |
Imager |
Resolution |
Line/Frame Rate |
Output |
| Jai - Offering
2CCD multi-spectral and high-dynamic range multi-sensor cameras |
| AD-080GE |
2x 1/3" CCD |
1024 x 768 |
30 fps |
GigE Vision |
| AD-081GE |
2x 1/3" CCD |
1024 x 768 |
30 fps |
GigE Vision |
|
AD-080CL |
2x 1/3" CCD |
1024 x 768 |
30 fps |
Camera Link |
| |
|
|
|
|
| 3CCD Cameras |
|
|
|
|
| Cameras using 3CCD sensors combine
three images to produce an RGB image. These cameras
produce the highest fidelity colour images. 3CCD
line scan cameras are suitable for continuous high-speed applications
in print inspection, surface quality inspection and colour document
scanning. |
| Model |
Imager |
Resolution |
Line/Frame Rate |
Output |
| Jai - A
selection of 3 CCD cameras for line and area scanning |
| CV-L108CL |
7.168 mm |
512 x 3 |
70922 |
Camera Link |
| AT-030MCL |
3 x 1/3" CCD |
659 x 494 |
120 fps |
Camera Link - base and medium |
| CV-M91 |
3 x 1/3" CCD |
752 x 582 |
25 fps |
RGB, Composite |
| CV-L107CL |
28.7mm CCD |
2048 x 3 |
19,048 lines / sec |
Camera Link |
| AT-200GE |
3 x 1/1.8" CCD |
1620 x 1236 |
15 fps |
GigE Vision |
| AT-200CL |
3 x 1/1.8" CCD |
1620 x 1236 |
20 fps |
Camera Link |
| AT-140GE |
3 x 1/2" CCD |
1392 x 1040 |
20 fps |
GigE Vision |
| AT-140CL |
3 x 1/2" CCD |
1392 x 1040 |
25 fps |
Camera Link |
| CV-M9 CL |
3 x 1/3" CCD |
1034 x 779 |
30 fps |
Camera Link |
| LT-400CL |
28.7mm CMOS |
4096 x 3 |
16180 |
Camera Link |
| |
|
|
|
|
| 4CCD Cameras |
|
|
|
|
| By adding a fourth sensor, one
that operates in the near-ir spectrum, a 4-CCD camera provides simultaneous
separate imaging of red, green and blue, plus near-infrared.
Incoming light is split into 4 spectral bands (RGB + NIR with perfect
pixel-to-pixel alignment, with all sensors seeing exavtly the same
point on the object at all times. Each of the four light-spectrum
bands are captured in four separate channels through the same optical
path, and by adding an NIR sensor to the configuration, it is possible
to identify an even wider set of defects on inspected objects. |
| Model |
Imager |
Resolution |
Line/Frame Rate |
Output |
| Jai - 4CCD
cameras - simultaneous separation of R, G, B and NIR |
| LQ-050CL |
4 x CCD 7.168mm |
512 x 4 |
70992 lines/sec |
Camera Link |
| LQ-200CL |
4 x CCD 28.7mm |
2048 x 4 |
19048 lines / sec |
Camera Link |
| SW-4010Q-MCL |
3X RGB CMOS, 1X SWIR InGaAs |
4096 x 3 |
Up to 39.2 kHz |
Camera Link |
| 3-CMOS Cameras |
|
|
|
|
| These cameras feature precisely-aligned
image sensors to produce the highest possible color fidelity in combination
with a high line rate.Because JAI prism-based design has a common
optical plane for all sensors, it is less complex to set up than typical
tri-linear cameras, and less likely to have problems with color registration
or parallax effects. This enables it to be used for a wide variety
of applications, including those where the surface needs to be viewed
at an angle other than perpendicular. CMOS technology is the lower-cost
option. |
| Model |
Imager |
Resolution |
Line/Frame Rate |
Output |
| Jai - Industrial-grade,
3CMOS, colour line scan camera |
| LT-200CL |
3 x CMOS 28.7mm |
2048 x 3 |
31446 lines / sec |
Camera Link |
JAI Apex Series |
| Model |
Resolution |
Sensor Type |
Imager size |
Frame Rate |
Output |
| AP-1600T-USB-LSX |
1456 x 1088 |
CMOS |
5.0 x 3.8 mm |
79 fps |
USB3 Vision (PoUSB) |
| AP-3200T-USB-LS |
2064 x 1544 |
CMOS |
7.1 x 5.3 mm |
38 fps |
USB3 Vision (PoUSB) |
| AP-3200T-USB-LSX
|
2064 x 1544 |
CMOS |
7.1 x 5.3 mm |
38 fps |
USB3 Vision (PoUSB) |
| AP-1600T-PGE |
1456 x 1088 |
CMOS |
7.1 x 5.3 mm |
24 fps |
USB3 Vision (PoUSB) |
| AP-1600T-PMCL |
1456 x 1088 |
CMOS |
5.0 x 3.8 mm |
126 fps |
USB3 Vision (PoUSB) |
| AP-1600T-USB
|
1456 x 1088 |
CMOS |
5.0 x 3.8 mm |
79 fps |
USB3 Vision (PoUSB) |
| AP-3200T-10GE |
2064 x 1544 |
CMOS |
5.0 x 3.8 mm |
106 fps |
USB3 Vision (PoUSB) |
| AP-3200T-PGE
|
2064 x 1544 |
CMOS |
7.1 x 5.3 mm |
12 fps |
USB3 Vision (PoUSB) |
| AP-3200T-PMCL |
2064 x 1544 |
CMOS |
7.1 x 5.3 mm |
55 fps |
USB3 Vision (PoUSB) |
| AP-3200T-USB |
2064 x 1544 |
CMOS |
7.1 x 5.3 mm |
38 fps |
USB3 Vision (PoUSB) |
| |
|
|
|
|
|
| JAI
Fusion 2- and 3-CMOS Multi-Sensor Prism Cameras |
| Model |
Resolution |
Sensors |
Imager size |
Frame Rate |
Output |
| FS-1600D-10GE
|
1440 x 1080 |
2xCMOS (Vis/NIR) |
5.0 x 3.8 mm |
226 fps |
10 GigE Vision |
| FS-1600T-10GE-NNM
|
1440 x 1080 |
3xCMOS (Vis/NIR/NIR) |
5.0 x 3.8 mm |
213 fps |
10 GigE Vision |
| FSFE-1600D-10GE
|
1440 x 1080 |
2xCMOS (Vis/NIR) |
5.0 x 3.8 mm |
226 fps |
10 GigE Vision |
| FSFE-1600T-10GE
|
1440 x 1080 |
3xCMOS (Vis/NIR) |
5.0 x 3.8 mm |
213 fps |
10 GigE Vision |
| FS-3200D-10GE |
2048 x 1536 |
2xCMOS (Vis/NIR) |
7.1 x 5.3 mm |
123 fps |
10 GigE Vision |
| FS-3200T-10GE-NNC |
2048 x 1536 |
3xCMOS (Vis/NIR/NIR) |
7.1 x 5.3 mm |
107 fps |
10 GigE Vision |
| FSFE-3200D-10GE
|
2048 x 1536 |
2xCMOS (Vis/NIR) |
7.1 x 5.3 mm |
123 fps |
10 GigE Vision |
| FSFE-3200T-10GE
|
2048 x 1536 |
3xCMOS (Vis/NIR) |
7.1 x 5.3 mm |
107 fps |
10 GigE Vision |
Talk to us about your multi-sensor camera needs.
Please contact Adept Turnkey for
further information about any 2CCD, 3 CCD cameras,
4CCD or 3CMOS camera.
|
