PXR Frame Grabber Family
Back to Advanced Scan Frame
Grabbers
Back to Imagenation Frame Grabbers
- Bus PCI bus master design for real-time image capture
- Input composite video format Monochrome, RS-170 (NTSC), CCIR
(PAL), interlace, progressive scan and resettable
- Input video Software selectable termination (75W or 10K W)
- Resolution RS-170: 640 x 480 pixels (maximum 768 x 486 pixels);
CCIR: 768 x 576 pixels; 256 gray level, 8 bit
- Power + 5 VDC, PCI, 700 mA
- Camera power + 12V at 1A for four cameras
- Supported operating systems Win 98, 98-SE, 2000, ME, NT4, XP
- Supported languages Visual C/C++
- Sampling jitter ± 2.6 ns with 1-line resync from reset;
0 using pixel clock input
- Video noise <- 0.5 LSB (least significant bit)
- Software programmable look up tables (LUTs) 256-byte programmable
- External trigger Four optically-isolated or TTL trigger inputs
- Strobe and exposure output One strobe output, two exposure outputs
(up to four pulses, up to 59.99 min)
- General purpose input/output (I/O) Four TTL inputs, four TTL
outputs
- Video multiplexing Up to four video inputs (switch on trigger)
- On-board memory 8MB image FIFO memory
- Direct memory access (DMA) Dual mode -- incremental or burst
options
- Flexible memory allocation Through scatter/gather technology
- ImageInfo "Stamps" images with complete image acquisition status information
- Programmable linear offset and gain
- Standard product Verified to FCC Part 15 Class A requirements. Full
compliance to CE EMC standards (EN-55022, EN-55024, CISPR-22)
- Software and manual CD included on first purchase
|