PXD Frame Grabber Family
Back to Digital Frame Grabbers
Back to Imagenation Frame Grabbers
- Input signal RS422 (up to 30 MHz per channel); EIA-644 (LVDS)
(up to 40 MHz per channel)
- Camera output Single channel: up to 32 bits/pixel and pixel
rates to 40M pixels/sec for EIA-644 (LVDS) signals; Dual channel: up to 16 bits/pixel
and up to 80M pixel/sec rates; Four channel camera at 8 bits/pixel and up to
160M pixels/sec rates
- Camera connector Single connector has 100 pins
- Camera power + 12V out at 800 mA and + 5V at 800 mA, available
on user connector and camera connector
- Supported Operating systems Watcom DOS4GW, Win 95 / 98 / ME,
Win NT / 2000
- Supported Languages - C / C++, Visual Basic
- Image capture area up to 32K x 32K pixels
- Line scan camera image capture up to 32K in width
- Programmable frequency synthesizer allows flexible synchronization
- On-board memory 4MB image FIFO
- Programmable debounced trigger
- Programmable horizontal and vertical synchronization
- Works with resettable and interlaced cameras
- Strobe output Two strobes, programmable pulse-width and polarity
can be used as camera exposure controls; TTL and RS422
- General purpose I/O (TTL) Four, two-in and two-out
- General purpose RS422 outputs Three, for camera control
- Input look up tables (LUTs) 4x8:8 or 2x16:16, facilitates on-the-fly
gamma correction, contrast, brightness, etc.
- On-the-fly hardware pixel reordering for multi-channel cameras
Two channel cameras: alternate pixels, alternate lines, alternate half-lines
with normal/reverse scan; four channel cameras: alternate 1 / 4 lines with normal/reverse
scan and quadrants with normal and reversed scans
- Software image cropping Select region of interest, provides
lower bandwidth
- Optional interface cable Supplied for popular cameras
- Optional cable kit Unsoldered connections on one end for other
cameras
- User connector Facilitates easy interface of strobes and triggers
to external equipment
- Camera configuration application Easy-to-use window for entering
data for specific camera configuration. Available for Win 95 / 98 / ME / NT /
2000 only
- Optional software protection
- FCC(A) and CE approved
|