PC2-CamLink
Back to Camera Link Frame
Grabbers
Back to Teledyne DALSA Frame Grabbers
PC2-CamLink frame grabber is ideal for cost-sensitive
applications.
Compatible with one monochrome area or linescan Base Camera
Link™ camera, the PC2-Camlink is a snap-to interface
for vision systems, due to the Camera Link standard and Teledyne DALSA’s
innovative visual status LED.
When the camera cable and external triggers are connected, the PC2-CamLink’s
bracket-mounted visual status LEDs provide an immediate visual indication
that all signals are present and active.
To simplify setup further, the PC2-Camlink provides direct power (5V
or 12V) to the camera. The PC2-CamLink has been engineered within
Teledyne DALSA's exacting Trigger-to-Image Reliability technology
framework to control and monitor more reliably and efficiently the
entire image-acquisition sequence. |
|
Key Features |
|
|
• Asynchronous image capture from multiple camerasVariable
frame length acquisition |
• Facilitates installation by providing visual status of the
acquisition |
• Shaft encoder with tick divider |
• Supports infinite vertical length frame (8K
pixels x infinite number of lines) |
• Separate inputs for 2 optocoupled/TTL and 2 LVDS triggers |
• Visual Status LED - visible on PCI bracket |
• Pin-to-pin connector compatible with other PC2
Series and PC Vision cards |
• Area Scan Camera Support - Frame size up to
8K pixels x 8K lines |
|
Model |
PC-2CamLink |
Camera Interface |
1 base |
Camera Format |
Base |
Pixel Clock |
up to 66 MHz |
Bits / Pixel |
up to 16 |
Number of Camera Taps |
up to 8-taps/8-bit |
Host Bus |
PCI-32 |
Frame Buffer |
8MB FIFO |
OS Support |
XP Pro, Vista 2000 |
Software |
Sapera, IFC (32-bit) |
Dimensions and temperature |
17cm L x 10.7 cm H. 0°C to 55° C. Relative Humidity: 5%
up to 95% (noncondensing) |
PC2-CamLink Data Sheet
|