Phantom C540

Compact 4 MP high-speed camera for precision imaging

The Phantom C540 packs C-Series image quality into a compact, fully standalone high-speed camera. Its low-noise 4 MP BSI sensor captures 2560 x 1680 images at up to 1,140 fps, while the 1-inch sensor format, modern lens support and integrated connectivity make it well suited to PIV, microscopy, biomechanics, DIC and precision industrial testing.

ENQUIRE NOW
Phantom C540 high-speed camera

Phantom C540 at a glance

1,140 fps

Maximum frame rate at full 2560 x 1680 resolution.

4 MP BSI sensor

15.3 mm, 1-inch format sensor with 5 micron pixels.

2 microsecond exposure

Short global-shutter exposure for freezing fast motion.

14 GB RAM

Integrated high-speed recording with multi-cine support.

C540 frame rates

Resolution Maximum frame rate
2560 x 1680 1,140 fps
2560 x 1260 1,520 fps
2560 x 1080 1,760 fps
2560 x 720 2,620 fps
2560 x 480 3,870 fps
2560 x 228 7,770 fps
1920 x 1260 2,000 fps
1920 x 1080 2,330 fps
1920 x 360 6,670 fps
1920 x 228 10,130 fps
1920 x 24 50,820 fps
1280 x 24 51,750 fps
ENQUIRE NOW BACK TO TOP

Exceptional image quality

The C540 uses advanced BSI CDS sensor technology with read noise below 5 e-, delivering clean, high-contrast images for measurement-focused work. Its 4 MP sensor and 5 micron pixels preserve fine detail while keeping the optical format compact.

  • Low-noise BSI sensor: Correlated double sampling supports cleaner imaging in low-light and high-contrast conditions.
  • Measurement-ready data: A low, consistent noise floor supports pixel-level analysis for PIV, DIC and high-magnification imaging.
  • Strong low-light performance: BSI architecture helps maintain image quality when available illumination is limited.

Integrated high-speed workflow

Recording, control and connectivity are integrated into the camera, helping simplify installation and data capture across laboratory, industrial and multi-camera setups.

  • Programmable I/O and synchronisation: Trigger, timecode, F-SYNC and other signals support precise system timing.
  • Onboard recording: 14 GB RAM, up to 63 multi-cine partitions and USB-A target storage support flexible capture and file transfer.
  • Standard networking: RJ45 Ethernet provides straightforward connection to Phantom Camera Control software.
  • Live monitoring: 3G-SDI video output and on-camera controls support setup, playback and monitoring.

Designed for real-world test environments

The 9.6 x 9.6 x 6.8 cm camera body weighs approximately 0.6 kg, making the C540 practical for benches, microscopes, test stands and other space-constrained installations.

  • Flexible lens integration: Available in RF-mount and C-mount configurations, with additional EF, F-mount and M42 options.
  • Practical mounting: Standard 1/4-20 and additional M4 mounting points support flexible camera placement.
  • Active cooling: Designed for sustained operation, with a quiet mode that disables fans during capture.
  • External synchronisation: F-SYNC and IRIG-B support repeatable multi-device and multi-camera testing.

Key specifications

Feature Phantom C540
Maximum resolution 2560 x 1680
Top frame rate at maximum resolution 1,140 fps
Maximum frame rate 51,750 fps at 1280 x 24
Minimum exposure 2 microseconds
Sensor BSI CDS, 15.3 mm / 1-inch format
Pixel size 5 microns
Bit depth 12 bit
RAM 14 GB
Multi-Cine Up to 63 partitions
Connectivity RJ45 Ethernet, USB-A, trigger, timecode, SDI and programmable I/O
Lens options RF-mount or C-mount; EF, F-mount and M42 options available
Camera size 9.6 x 9.6 x 6.8 cm
Weight 0.6 kg
Power 30 W typical at 24 V
ENQUIRE NOW BACK TO TOP

High-speed imaging applications

Digital Image Correlation

High-resolution, synchronised capture for deformation and strain measurement.

Particle Image Velocimetry

Low-noise imaging and precise timing for flow visualisation and PIV measurements.

Automotive Crash Testing

Compact deployment for impact, deformation and vehicle motion analysis.

Defense and Aerospace

High-speed capture for projectile tracking, flight analysis and impact observation.

Industrial Testing

Analyse drop tests, fracture, machine motion and fast manufacturing processes.

Microscopy and Biomechanics

Compact high-speed imaging for biological motion, microscopy and high-magnification work.

Additional Resources & Technical Datasheets
→ Phantom C540 / C980 Datasheet

Discuss your Phantom C540 application

Adept Turnkey can help match the C540 to your required frame rate, optics, lighting, synchronisation and measurement workflow.

TALK TO AN ENGINEER PHANTOM