Specim FX series Back to Specim Back to Hyperspectral Cameras

The Specim FX series currently consists of four robust hyperspectral cameras that have been specifically built for industrial imaging applications.

The camera series provides 100% image covering and uses non-destructive methods by collecting its results from a target's chemical composition.

The Specim FX series is an easily-integrated product that can be installed on new and existing sorting lines and imaging results are accessible through commercial analysis software on a standard interface.

Data analysis results are then communicated through to sorting machines and can be applied to systems such as robot hands and air jets.

Specifications	Specim FX50	Specim FX17	Specim FX10	Specim FX10+
Spectral range	2.7 - 5.3 µm	900 – 1700 nm	400 – 1000 nm	400-1000 nm
Frame Rate (Full range)	380 fps	670 FPS	330 FPS	705
Spectral resolution	35 nm	8 nm	5.5 nm	15 nm
Weight	7 kg	1.56 kg	1.26 kg	1.3 kg
Dimensions (L x W x H)	280 x 202 x 169 mm	150 x 85 x 75 mm	150 x 85 x 71 mm	150 x 85 x 71 mm
Spectral bands	154	224<	224<	100
Spatial Sampling	640 px	640 px	1024 px	1024
Data output	GigE Vision/Custom ethernet	GigE Vision/CameraLink	GigE Vision	GigE Vision
Sensor Type	InSb	TE-cooled InGaAs photodiode array	CMOS	CMOS
Datasheets	Specim FX50	Specim FX17	Specim FX10	Specim FX10

Need a price or more information? Please email Adept Turnkey or call our offices
Adept Turnkey Pty Ltd are Machine Vision and Imaging Specialists and distributor for Specim products in Australia and New Zealand.
To find out more about the Specim options or any Specim product, please contact us or call us at Perth (08) 9242 5411 / Sydney (02) 9979 2599 / Melbourne (03) 9384 1775