Available Models: MV1-D1312IE-40-G2-12 (available on request)
MV1-D1312IE-80-G2-12 (available on request) MV1-D1312IE-100-G2-12

The camera series MV1-D1312(IE)-G2 (Rev 2) is based on the Photonfocus CMOS image sensors A1312 and A1312IE, the NIR enhanced version of the A1312.

The 1-megapixel resolution, monochrome CMOS sensor camera series with a full well capacity (FWC) of 90 ke- are optimized for high dynamic range applications and a high signal-to-noise ratio (SNR). All three models have a GigE interface and are available in three different speed grades.

These cameras focus on demanding applications in industrial image processing as they offer an extraordinary wide dynamic range and a high framerate combined with high resolution. Due to the global shutter, even high-speed applications with exposure times in the µs-area are possible.

Features
• Configurable region of interest (ROI) • Up to 512 regions of interest (MROI) and decimation • 2 look-up tables (12-to-8 bit) on user-defined image region (Region-LUT)
• 3 x 3 convolver for image pre-processing in the camera • Integrated digital reduction of fix pattern noise (FPN) • Integrated shading correction
• Temperature monitoring of sensor and camera • Ultra-low trigger delay and low trigger jitter • Crosshairs overlay on the image
• LinLog® response curve • Spectral range: A1312 sensor: 370 - 1000 nm; A1312IE sensor 370 - 1050 nm

Model
MV1-D1312IE-40-G2-12
MV1-D1312IE-80-G2-12
MV1-D1312IE-100-G2-12
Resolution
1312 x 1082
Sensor
1 megapixel progressive scan 1" CMOS monochrome maximum resolution (2/3" 1024 x 1082 resolution)
Pixel Size
8.0 µm square
Max. Frame Rate
27 fps
55 fps
68 fps
Interface
Gigabit Ethernet
Pixel Clock
40 MHz
50 MHz
Greyscale Resolution
8–bit/10–bit/12–bit
Mount Type
C-Mount–(CS-Mount–optional)
Operating Temp
0°C...+50°C
Power Requirements
+24 V DC (±10%)
Weight

265g

Dimensions

60 x 60 x 51 mm³

PhotonfocusMV1-D1312I CameraLink Series Datasheet