Back to Photonfocus Cameras
Back to High Resolution Monochrome Cameras
Back to High Speed Cameras
| Available Models: | DS1-D1312-40-CL-10 | DS1-D1312-80-CL-10 | DS1-D1312-160-CL-10 |
The
greater than 1-megapixel resolution, monochrome CMOS sensor camera
series with a full well capacity of 90 ke-, is optimized for high dynamic
range applications, has a high signal-to noise-ratio and a CameraLink
interface.
These cameras focus on demanding applications in industrial image processing
and offer an wide dynamic range and a high frame rate combined with high
resolution.
Readily and easily integrated into standard vision applications, three camera models with different speed grades are available and focus on providing solutions for demanding industrial applications.
| Features | ||
| • Exceptional SNR up to 300:1 | • Good NIR spectral response - 370 - 1000 nm | • Dynamic range up to 60 dB |
| • Configurable region of interest | • Temperature monitoring of sensor and camera | • Ultra-low trigger delay and low trigger jitter |
| • Integrated digital reduction of fix pattern noise | • Integrated shading correction | • Global Shutter |
| Model | DS1-D1312-40-CL-10 |
DS1-D1312-80-CL-10 |
DS1-D1312-160-CL-10 |
| Resolution | 1312 x 1082 pixels (1.4 megapixel
resolution) |
||
| Sensor | 1.4 megapixel progressive scan
1" CMOS monochrome |
||
| Pixel Size | 8.0 µm square |
||
| Max. Frame Rate | 27 fps |
55 fps |
108 fps |
| Interface | CameraLink®–Base
|
||
| Pixel Clock | 40 MHz |
80 MHz |
|
| Greyscale Resolution | 8–bit/10–bit |
||
| Mount Type | C-Mount–(CS-Mount–optional) |
||
| Operating Temp | 0°C ... +50°C |
||
| Power Requirements | +12 V DC (±10%) |
||
| Weight | 265 g |
||
| Dimensions |
60 x 60 x 45 mm³ |
||
