The Spark SP-5000M-USB (mono) and SP-5000C-USB (colour) are high-performance 5-megapixel CMOS cameras providing an exceptional combination of resolution, speed and image quality and support the USB3 Vision interface standard enabling direct, "grabber-less" connection to PCs or other image processing hardware.

These models utilize a 2560 x 2048 pixel CMOS imager allowing the cameras to output full resolution, 8-bit monochrome or raw Bayer images at 62 fps. 10-bit output is provided at up to 50 fps.

Featuring a mixture of on-chip and in-camera capabilities enables them to deliver image quality well beyond what is typical for high-speed CMOS cameras and a combination of analog and digital gain controls helps to reduce the amount of quantized noise in low-light images compared to conventional CMOS cameras with digital gain functions alone. The colour model is provided with an on-chip 4-channel analog gain control for better white balancing and colour shading correction with reduced noise.

Also included is Auto Level Control that combines auto gain, auto shutter, and auto iris capabilities in an integrated function to let users optimize their auto exposure control for lowest noise, fastest shutter or other priorities.

The cameras are equipped with an auxiliary lens control circuit that supports P-iris control, as well as programmable 3-axis control of motorized zoom lenses or other analog accessories.

Single and multi-ROI capabilities, available for both monochrome and colour models, provide added flexibility for utilizing both the high frame rate and pixel resolution of the cameras. On monochrome models, 2X binning is supported in horizontal, vertical, or both directions.

Outdoor applications benefit from the cameras’ built-in high dynamic range mode (monochrome models), the ALC capability and an extended temperature rating. The cameras feature industrial grade construction for reliable operation and durability and so can withstand the rigors of real-world applications.

Features
High-speed "grabberless" operations	Frames rates are among the fastest currently available for these "grabber-less" interfaces.
Global shutter	Handles motion without spatial distortion
Noise minimalisation	On-chip and in-camera pattern correction to minimise CMOS pattern noise
Regions of interest	Supports single or multiple RIO modes for faster frame rates
Exposure control	Timed and trigger width exposure control
Dynamic range	60 dB linear dynamic range with 100 dB piece-wise HDR mode (HDR on monochrome only)
4-channel analog gain	For white balance or colour shading correction so each colour can be individually optimised for a balanced image with less overall noise
Industrial-grade construction	Built for the rigors of real-world applications by being able to withstand vibration and shock conditions of 10G and 80G, respectively
Thermal management	Extended temperature range allows the camera to be used in hot factory environments as well as in harsh climates or high altitudes

Applications
The combination of speed and resolution makes these models ideal for a wide range of applications among which are:
• robotic applications	• inspecting semiconductors/electronics	• autonomous vehicle control	• bioscience
• defense	• aerospace	• traffic	• process monitoring
Any machine vision or medical application demanding high frame rates at HD resolution or higher, but still requiring sensitivity and image quality would benefit from using these cameras.

Model	SP-5000M-USB and SP-5000C-USB
Sensor	1" cmos 5-megapixel, monochrome and colour CMOS
Resolution	2560 (h) x 2048 (v)
Pixel Size	5µm square
Interface	USB3
Frame Rate	Up to 62 frames--per-second at full resolution
Shutter	Global
Lens Mount	C-mount
Operating and storage temperature	-45°C to +70°C
Humidity	20 - 80% non-condensing
Power	12V to 24V DC ± 10%. 6.24W typical
Vibration	10G (20 Hz to 200 Hz XYZ)
Shock	80G
Dimensions (H x W x L)	62 mm x 62 mm x 55.5 mm
Weight	255 g

SP-5000-USB Datasheet