|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| AM-800CL Go to Jai Cameras Go to Ultra-High Resolution Monochrome Cameras |
 |
The AM-800CL is an 8-megapixel industrial grade CCD camera offering a combination of ultra-high resolution, high fidelity and high frame rates and features the KAI-08050 quad-tap sensor from Kodak which is capable of providing full 3296 x 2472 monochrome resolution at 17 fps. A standard Camera Link digital interface supports 8-bit, 10-bit, or 12-bit output.
The AM-800CL uses the Kodak CCD’s quad-tap architecture for rapid image acquisition, then combines the four taps into two for monochrome readout over a simple one-cable Camera Link base configuration. Built-in channel balancing capabilities are provided to ensure uniformity across the image.
Comprehensive set of features
The camera features user-configurable AOI scanning (partial scanning),
horizontal and vertical binning modes and a variety of acquisition modes,
including continuous, single-frame, and multi-frame capture. Advanced
image pre-processing features range from auto-gain, auto-shutter, and
pixel blemish compensation, to flat-field compensation and a 256-point
look-up table for gamma customization.
Like JAI’s other high-resolution cameras, the AM-800CL incorporates a list of industrial grade features to maximize performance in machine vision environments. These include precise sensor alignment, advanced thermal management, a built-in temperature sensor, and rugged construction with extensive shock and vibration testing performed.
The camera can be ordered with either C-mount or F-mount lens mounts.
Target
applications that benefit
from speed/resolution combination
The cameras are suitable for applications where high image quality and
a wide field of view are required and need to utilise the 8-megapixel
resolution to study small details and so reduce the number of passes required
to inspect large areas. Typical applications include:
** Flat-panel LCD inspection
** Solar panel inspection
** PCB inspection
** Higher-speed assembly lines where small details need to be examined
** pharmaceutical inspection
** Inspection of washers, connectors or other small, discrete items
** The auto-exposure capabilities make the cameras suitable for a variety
of traffic-related applications.
| Model | AM-800CL monochrome camera |
| Sensor | 4/3" progressive scan CCD |
| Resolution | 3294 x 2472 |
| Pixel Size | 5.5 x 5.5µm |
| Control Output | CameraLink base |
| Frame Rate | 17 fps in full resolution |
| Lens Mount | F mount or C-Mount |
| Operating temperature | -5°C to +50°C |
| Power | 12V to 24V DC ± 10%. 7.8W typical. (full frame @ 12V) |
| Dimensions | 55 x 55 x 98 mm - F-mount; 55 x 55 x 69 mm - C-mount |
| Weight | 340g F-mount; 280g - C-mount |
JAI AM-800CL Datasheet|
If you like this page, please recommend and share it. |
||
| More | ||
