|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| Piranha4-8k
colour -50 kHz Go to Teledyne Dalsa Cameras Go to Line Scan Cameras |
 |
The Piranha4 8K colour camera is built with features to ease system integration.
Precise sensor alignment across X/Y/Z axes allows reliable, optimized
performance in multi-camera systems, while an GenICam-compliant user interface
makes controlling camera parameters a user-friendly experience.
With line rates up to 50 kHz and 8k resolution, the Piranha4 8k colour
camera inspects and detects with precision, speed and responsivity.
Based on Teledyne DALSA's unique line scan CMOS sensor architecture which minimizes spectral and spatial crosstalk, the Piranha4 8K colour line scan camera provides outstanding signal-to-noise for high-speed imaging. It offers low read noise and high full well capacity, resulting in a better dynamic range for demanding applications.
Programmability features of the Piranha4 8k colour camera include exposure control, gain setting, flat field correction, white balance, and color correction. Special algorithms allow defocusing capability in flat field correction and white balancing without the need to adjust the optical lens. In addition, an advanced GenICam™ compliant interface makes the camera easier to setup, control, and integrate.
The Piranha4 8K colour's sensor arranges red and blue color pixels alternating in one line and all the green pixels in the other line with no spacing between the lines. This unique design reduces colour crosstalk by limiting the number of locations where adjacent pixels are red/green or green blue. Red and Green filters overlap spectrally as do Green and Blue. By reducing the occurences these colours are next to each spatially, the designers have improved the colour image quality. The camera offers several colour output format options, including RGB, RG/BG or G only, to meet different imaging requirements.
| Key features and benefits | ||
| • Bilinear color CMOS line scan | • Adjustable exposure time and line rate | • On-chip ADC and CDS |
| • RGB, RG/BG, or G output | • Adjustable digital gain and offset setting | • 100% fill factor G channel |
| • Flat field correction/shading correction with defocusing | • White balancing and colour correction | • Test patterns and diagnostics |
| • Optimized sensor design with minimized colour crosstalk | • 100x antiblooming | • Test patterns and diagnostics |
| Applications
|
||
| • High-throughput applications | • Print inspection | • High performance document scanning |
| • Electronics | • Solar cell, film and large-format web inspections | • Flat-panel display inspection |
| Model | Piranha4-8k-50kHz
colour |
| Resolution | 8192 x 2 pixels |
| Max. Line Rate | 50 kHz |
| Data Format | 8-bit or 10-bit, selectable |
| Pixel Size | 7.04 µm x 7. 04 µm |
| Output | Camera Link |
| Responsivity | 8.9 DN / (nJ / cm²) @ 1x gain, 8 bit |
| Dynamic range | 62 dB |
| Lens Mount | M72 x 0.75 |
| Operating Temp | 0 °C to 50 °C, measured at the front plate |
| Power | Hirose 6-pin male, +12 VDC to +24 VDC |
| Dimensions | 80 mm (W) x 80 mm (H) x 57 mm (D) |
| Weight | 700 g |
Teledyne DALSA Piranha4-8k-50 kHz Data sheet|
If you like this page, please recommend and share it. |
||
| More | ||
