|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| Genie
TS-M1920 Go to Teledyne Dalsa Cameras Go to Ultra-high Resolution Mono Cameras Go to GigE Cameras |
 |
The Genie TS-M1920 uses a CMOSIS CMV2000 monochrome CMOS sensor with a resolution of 2048 x 1080. Teledyne DALSA’s "Burst Mode" feature allows for image capture rates of 70 fps in 2 megapixel resolution with a true global shutter while maintaining exceptional image quality.
The Genie TS-M1920 takes advantage of gigabit Ethernet technology, transmitting
data over standard CAT-5e and CAT-6 cables to distances of up to 100 m.
Like all Genie cameras, the TS-M1920 is based on AIA (Automated Imaging
Association) GigE Vision Standard to directly link the camera to a PC.
| Features and benefits | ||
| • Uses standard PC Ethernet port and hardware | • Simplified set-up with Sapera Essential | • Ruggedized to accommodate industrial environments |
| • Supports cable lengths up to 100 m - CAT-5e or CAT-6 | • Auto-Iris (Video, DC or Motorized) | • Partial scan mode to achieve higher frame rates |
| • Global electronic shutter with exposure control | • Extended Dynamic Range Function | • On-board flat-field correction |
| • Programmable LUTs | • On-board image compression | • Auto brightness feature |
| Typical applications | ||
| • Electronics manufacturing inspection | • Industrial metrology | • Intelligent traffic systems |
| Model | Genie TS-M1920 |
| Resolution | 2048 x 1080 |
| Sensor | CMOS monochrome |
| Max. frame Rate | 70 fps |
| Pixel Size | 5.5 µm |
| Output | Gigabit Ethernet, also supports 100 Mbps |
| Lens mount | CS-Mount |
| Operating temperature | -20 to +60c |
| Power supply | 12 to 24V or Power Over Ethernet (POE) |
| Dimensions | 49 x 49 x 56 mm |
| Weight | 196 g |
Teledyne DALSA Genie TS-M1920 Data sheet|
If you like this page, please recommend and share it. |
||
| More | ||
