|
|
Equipped with a microbolometer sensor,
The Calibir GX camera family by Teledyne Dalsa is perfectly suited to a
range of thermal applications. With great sensitivity in longwave infrared
range (8-12 µm), it features both shutter and shutterless operation
and rapid image output on power up while delivering uniform response over
the entire operating temperature range, making it an ideal component for
thermal imaging systems requiring uninterrupted image acquisition. The GX
series also offers our own advanced 21-bit ADC design for unparalleled intra-scene
dynamic range without the need for a gain reduction, allowing for the best
possible NETD over a vast range of temperature (>600C).
Features
|
|
Radiometric operation
for precise temperature output
21 bit ADC for immense intra-scene
dynamic range
Gigabit Ethernet (GigE) Contact
us for other options (MIPI-CSI2)
General purpose opto-coupled
input/ output (external trigger, count, or timer driven triggering).
Flexible general purpose Counter
and Timer functions for internal/external controls
Defective Pixel replacement
Adaptive Image Enhancement
IEEE1588-2008 Precision Time
Protocol synchronization capable
Built-in Pseudo-colour for enhanced
visualization
Image metadata supported
Application development with
the freely available Sapera LT software libraries
Internal mechanical shutter
for remote recalibration
|
Applications
|
Welding
Detecting elevated
body temperature
Sintering
Baking
Smelting
Firefighting
|
General Specifications
|
GXM
|
GXF
|
Resolution |
320 (H) x 240 (V)
|
640 (H) x 480 (V) |
Frame Rate |
30 Hz |
60 Hz |
Pixel size |
17 µm
|
Temperature Accuracy |
non-radiometric
|
: +/- 1°C accuracy from 25 to 45°C |
size |
29 mm x 37 mm x 59 mm
|
Bit depth output |
8 or 12 bit depth selectable
|
I/O |
GigE Vision, CSI-2
|
Operating
temp |
-35°C to 60°C
|
Power
connector |
via Samtec 10-pin connector (or optionally using
PoE)
|
|