|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| SG-34-04K80 Go to Teledyne Dalsa Cameras Go to Line Scan Cameras Go to GigE Cameras |
 |
| About the SG-34 colour models | |||
| Based on the Spyder3 dual line
scan model, this colour bilinear line scan camera
provides high colour fidelity, flexibility and a low cost solution
and has the red and blue colour pixels alternating in one line and
all the green pixels in the other line with no spacing between the
lines (see illustration on right). Several colour output format options, including RGB, RG/BG, or G are offered to meet different imaging requirements. Also incorporated are advanced features such as flat field correction, automatic white balance, and the camera is pre-calibrated to light sources such as white LEDs for ease of use. |
 |
||
Fully programmable, the Spyder3 offers precise control over
key performance variables such as gain and offset.
In addition to its high performance and affordability, Spyder3 GigE also
incorporates advanced features, via SaperaLT software, such as flat field
correction and CDS (Correlated Double Sampling).
A GUI is provided allowing users to begin imaging in minutes and the GigE
interface means that a frame grabber is no longer needed, resulting in
significant system cost savings.
| Other features and benefits | |||
| • RGB, RG/BG, or G output formats | • Gigabit Ethernet interface, GigE Vision compliant | • Flat field correction | |
| • Pre-calibrated light sources | • Cost effective | • Easy to use | |
| • NEW Supported by SaperaLT software | • NEW Higher operating temperature (65°C) | • NEW Improved graphic user interface for easier setup | |
| • Automatic white balance | Colour corrrection | • Bidirectional | |
| • Antiblooming and exposure control | • Programmable gain, offset, line rates, trigger mode, test pattern output, and camera diagnostics | ||
| Typical applications | |||
| • Cotton and textile inspection | • Food, drug and tobacco inspection | • Wood/tile/steel inspection | • Recycling sorting |
| • General machine vision | |||
| Model | Spyder3 SG-34-04K80 |
| Resolution | 4096 x 2 |
| Max. Line Rate | 9 kHz |
| Data Format | 8-bit |
| Pixel Size | 10µm |
| Video Output | GigE Vision |
| Dynamic Range | 60 dB |
| Responsivity | 4 DN / (nJ/cm²) @ 0 dB, 8 bit (4k) |
| Nominal gain range |
0 to +20 dB |
| Lens Mount |
M58 x 0.75 |
| Operating Temp |
0 °C to 65 °C (New) |
| Power supply |
+12 V to +15 V |
| Dimensions |
72 mm x 60 mm x 65 mm |
| Weight | <300g |
Teledyne DALSA Spyder3 SG-34-04K80 Data sheet|
If you like this page, please recommend and share it. |
||
| More | ||
