|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| Genie
NANO XL Mono series Back to Ultra-high-resolution Monochrome cameras Back to GigE cameras Back to Teledyne DALSA |
 |
Compact GigE Vision with very high 16/25
MP resolution, no image quality loss and at a lower cost
Very high resolution, affordability and ease-of-use, the Genie Nano XL
is specifically engineered for industrial imaging applications that require
improved network integration. More affordable than the older CCD sensors,
these CMOS-sensor digital cameras provide substantial savings for comparable
resolutions.
Using standard gigabit ethernet technology, which supports cable lengths of up to 100 metres, Teledyne DALSA’s “Burst Acquisition” and “Turbo Drive” features enable image capture rates of 30 fps in the 16 Mpixels resolution (XL-M4090 model) or 20 fps in 25 Mpixels resolution (XL-5100 model) while maintaining very good, and uncompressed, image quality. (The inclusion of Teledyne DALSA's proprietary TurboDrive (see below) technology means that a higher frame rate can be achieved at full resolution.) The Trigger-to-Image-Reliability framework controls and monitors the entire process from trigger through image capture and transfer to host memory; and helps protect from data loss. The inclusion of Trigger-to-image reliability framework (T2IR) as standard, provides full system monitoring, control and diagnostics while developing and servicing. T2IR is a series of hardware and software features that work together to improve the reliability of an inspection system (see summary video below).
Small, rugged and built for endurance and reliability, the Genie NANO's TurboDrive gives it the ability to ease through the GigE bottleneck without compromising image quality and without making any hardware or software changes to a network or to an application. And, despite its small size, the Nano XL brings greater capability than any other camera currently in the same class and at a lower cost.
| Key
features
|
||
| • Compelling price point |
• TurboDrive-enhanced
- up to almost 2x faster transmission • Multi ROI windows (up to 32) • Binning • In-camera accumulation count • Versatile I/O - 2 inputs + 2 opto-coupled outputs • Robust, all-metal body. Higher operating temperatures • Metadata support |
• High speed, low noise and global
shutters • GigE Vision • Wider, deeper feature set • Burst acquisition • Multi-exposure feature • Global electronic shutter with exposure control • IEEE1588 (Precise Time Protocol) support |
| Typical
applications
|
|||||
| • Aerial surveillance |
• Industrial metrology |
• Machine Vision inspections | • Pick-and-place | • Motion monitoring | • Intelligent
traffic systems |
| |
||
Benefits of Trigger-to-image-reliability |
Genie
Nano family, a GigE vision CMOS area scan camera series - VGA -
25MP |
| Model | Nano XL M4090 |
Nano XL M5100 |
| Resolution | 4096 x 4096 |
5120 x 5120 |
| Sensor | CMOS On-semi Python 16 MP |
CMOS On-semi Python 25 MP |
| Frame rate | 30 fps |
20 fps |
| Pixel size | 4.5 µm x 4.5 µm
|
|
Data output transfer |
Gigabit Ethernet (1000 Mbit/s) only | Exposure Control | Automatic, Programmable, or via External Trigger | |
|
Image Buffer |
500 MB on-board memory | Size - no lens adapter or connectors |
30 mm x 59 mm x 59 mm | |
| Lens Mount | M42 mount | Mass | ~163 g | |
| Power supply | 10 to 36V or Power Over Ethernet (POE) | Operating temperature | -20 to +60ºC (housing temperature) | |
Genie NANO XL 4090
data sheet
Genie NANO
XL 5100 data sheet |
||||
Need
a price or more information? Please
email us |
||||
|
If you like this page, please recommend and share it. |
||
| More | ||
