The device incorporates a dual actuator system. This dual actuator system incorporates the drive circuit for the auxiliary actuator onto the device, allowing the shutter to be controlled with existing VMM and VCM UNIBLITZ drive units only. Please note that the 122-BP will not operate the CS90 at this time. (For more information regarding the use of OEM drivers - either UNIBLITZ or of your own design, please contact technical support.) As an option, the shutter can be equipped the electronic synchronization system.

When gating high intensity light sources, the CS90 can be equipped with polished stainless steel reflective blades. This option protects the shutter blades from the light source's damaging effects by reflecting the energy away from the blade surface. Look for future availability of "Z" (AlSiO) and "ZM" (AlMgF2) coated blades in this device.

To further enhance the flexibility of the CS90; an optional #103 mounting ring is available to allow the shutter to be easily mounted in many non-specific applications. Additional information regarding the #103 mounting ring can be found in the specific data sheets entitled "MICROSCOPE, VIDEO, or UNIVERSAL MOUNTING SYSTEMS" or online under "products", "Mounting Systems".

• Small form factor, a 90 mm aperture fits into a 7-inch diameter housing!
• Multi-bladed design in combination with the UNIBLITZ actuator, and a state of the art damping system provide increased reliability over other designs of this type.
• Reflective stainless steel blades available as with Vincent LS, VS, CS45, and CS65 series.
• Can be driven with our existing VMM/VCM drive units (The 122-BP will not operate the CS90). Special driver not required.
• Available housed or un-housed for OEM applications.
• #103 Mounting Ring available for universal mounting applications.
• Electronic Synchronization System option available.
• Exposure repetition rates from DC to 3 Hz.
• Design, accuracy, and reliability that you have come to know as with all other UNIBLITZ products!