AT logo - The Machine Vision Specialists  
  Frame Grabbers  
  Vision Systems  
  Contact AT  
  Site Map  
Request product information


(08) 9242 5411

(02) 9905 5551

(03) 9384 1775

Defence Recognised Supplier Scheme Logo


Capture every detail at high speed with the Falcon4-CLHS M8200

Back to Newsletter
Go to Teledyne Dalsa

Go to Ultra-High Resolution Monochrome
Go to Product Page

Falcon4-CLHS clarity at high bandwidth with global shutter CMOS camera

The Falcon4-CLHS M8200 camera by Teledyne Dalsa is built with an Ultra-High-Resolution 67.1 Megapixel industrial sensor from Teledyne e2v. With a Camera Link HS (CLHS) standard interface, the Falcon4-CLHS M8200 provides users with very sharp images for real-time applications where deterministic data delivery is required.

The Falcon4-CLHS M8200 provides unique solutions to large area, high resolution imaging and with a frame rate of 90 fps at full resolution, it is well suited to applications like aerial imaging, reconnaissance, security and surveillance, 3D Metrology and Flat Panel Display Inspection.

The Falcon4-CLHS M8200 can access even higher frame rates in high throughput production environments by using binning or partial scan mode where pixels are added together or only the region of interest in the image is output.

The Falcon4-CLHS M8200 is available only in monochrome, and is often used with filters operating at a specific wavelength or where colour is of no importance. Discarding colour allows this camera to image with up to 1.33x higher clarity than a colour equivalent and so provides extremely precise measurements.

The CLHS interface requires a frame grabber to be fitted to the computer and it delivers data to host memory with low latency and in a known time using DMA transfer capability built in to the Dalsa frame grabber. Applications that require real-time or in-time analysis benefit greatly by using CLHS and are further benefited by Teledyne Dalsa's T2IR capability which offers more reliable data transfer and diagnostics.

Machine Vision
Motion Tracking and Analysis
Factory Automation Inspection
Electronic Inspection
High Speed 3D imaging
67.1MP monochrome
In-camera image pre-processing (lens shading correction, pixel correction)
Large full-well when using in-sensor binning >152Ke for high dynamic range scenes
Partial Scan Mode allows frame rate boost (ROI)
Multi-ROI support (up to 32 ROI) and Cycling Mode
Advanced Sequencer functions
Quick Specifications
Falcon4-CLHS M8200

8192 x 8192

Sensor Model
Teledyne e2v Emerald 67M
Frame Rate
90 fps at full resolution
Pixel Size
2.5 um
Dynamic Range
58.2 dB
Max. Image Circle
Data Format
8- 10-bit Mono
Shutter Type
Global Shutter
Operating Temperature
-20 to 65 °C
Dimensions (LxWxH)
59 x 59 x 70 mm

Need a price or more application information? Please email Adept Turnkey or call our offices
Adept Turnkey Pty Ltd is "The Machine Vision and Imaging Specialists" and distributor of Teledyne Dalsa in Australia and New Zealand. To find out more about any Teledyne Dalsa product, please call Adept Turnkey at Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or contact us online.



If you like this page, please recommend and share it.

Facebook Twitter More