The Goldeye P-032 SWIR is a camera with a spectral response from 900 nm to 1700 nm for short-wave infrared applications . Its InGaAs sensor features high sensitivity, very good linearity, a high damage threshold against intense illumination and produces an outstanding, low-noise image quality.

Offering 30 fps at 636 x 508 resolution and available with Peltier cooling, the Goldeye is recommended for applications with long exposure times or for exact temperature measurements. Its numerous image preprocessing features results in producing better image quality.

The Goldeye is a GigE Vision camera but is also available with Camera Link interface (Goldeye CL-032 SWIR)

Key features
• Switchable gain, factor 20 with short exposure times • Shipped with built-in correction data sets • Gain/offset correction (NUC/non-uniformity correction) for each pixel
• Factory adjusted bad pixel correction • Background (FPN) correction • Continuous mode (image acquisition with maximum frame rate)
• Exposure time 5 µs – 1 s • Image On Demand mode (triggered image acquisition)
 

Applications
• Short-wave infrared imaging • Thermal imaging of hot objects ( 250°C to 800°C) • Semiconductor inspection • Water or moisture detection
• Imaging spectroscopy • Laser beam profiling • Plastic sorting • Medical science and biology
• Vision enhancement      

Model Goldeye P-032 SWIR and Goldeye CL-032 SWIR
Resolution 636 x 508
Sensor InGaAs
Max. frame rate at full resolution 30 fps
Pixel Size 25 µm x 25 µm
Spectral range SWIR, 900 - 1700 nm
Interface GigE 1000baseT. Also available with Camera Link interface
Operating temperature 0°... +35 °C
Power consumption (12 V) 15.6 W
Lens mount C/F-Mount
Dimensions (L x W x H ) 115.8 x 90 x 99 (C-Mount)
Weight 1110 g (C-Mount)

AVT Goldeye P-032 SWIR/CL-032 SWIR camera data sheet