|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
Important information regarding changes to the Photonfocus product line-up
Back
to Newsletter
Go
to Photonfocus
|
Photonfocus MV4 series |
|
Specifically
the MV1-D2048x1088-C01-G2 and MV1-D2048x1088-C01-3D06-G2 are being
transitioned into Photonfocus MV4 series. Please contact us online if you have any questions on these new products and how we can assist in transitioning your clients from MV1 to MV4 series. |
|
MV4-D2048x1088-C01-G2
|
|
The
MV4 CMOS camera series was developed for advanced machine vision
applications, motion analysis and demanding applications of optical
metrology. The CMOSIS CMV2000 CMOS image sensor is optimized for
high speed applications and is combined in this camera with an advanced
feature set to reduce the amount of data to be transferred.
|
|
MV4-D2048x1088-C01-3D06-G2
|
|
The 3D CMOS cameras MV4-D2048x1088-C01-3D06-G2 are designed for high triangulation rates. The CMOSIS CMOS image sensor CMV2000, which is optimized for high frame rates and high sensitivity, was combined with two robust algorithms to determine the triangulation line in the FPGA of the camera. The user can either employ a FIR algorithm for asymmetric line profiles or a robust COG algorithm for symmetric profiles. |
|
MV4-D2048x1088-G2
& MV4-D2048x1088-C01-3D06-G2 key features:
|
|
•
Linear Mode / multiple slope (High Dynamic Range Mode)
|
|
•
Configurable region of interest (ROI)
|
|
•
Temperature monitoring of camera
|
|
•
Low trigger delay and low trigger jitter
|
|
•
Extended trigger input and strobe output functionality
|
|
•
4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422,
TTL, D-HTL, HTL)
|
|
•
3x Isolated outputs (2x open drain, 1x TTL highspeed)
|
Need a price or more application information? Please email Adept Turnkey or call our offices Adept Turnkey Pty Ltd is "The Machine Vision and Imaging Specialists" and distributor of Photonfocus products in Australia and New Zealand. To find out more about Photonfocus or any Photonfocus product, please call Adept Turnkey at Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or contact us online. |
Due
to supply chain issues, the MV1 series has been strongly affected
in regard to the FPGA processor used in the MV1 series.|
If you like this page, please recommend and share it. |
||
| More | ||
