AT logo - The Machine Vision Specialists  
  Cameras  
  Frame Grabbers  
  Lenses  
  Lighting  
  Software  
  Vision Systems  
  Accessories  
  News  
  Careers  
  Contact AT  
  Site Map  
Request product information

Contact
info@adeptturnkey.com.au

Perth:
(08) 9242 5411

Sydney:
(02) 9905 5551

Melbourne:
(03) 9384 1775


Defence Recognised Supplier Scheme Logo

 

CM-030GE RH: great features, high performance and networking flexibility

JAI  CM-030GE RH camera Go to CM-030GE RH

Go to Jai Cameras

Go to GigE Cameras

JAI  logoWhen small and light is important
JAI's new remote head, GigE camera

Constantly striving to improve their products, JAI introduce the GigE version of their popular Power-over-Mini-Cameralink model.

Developed as the result of requests from customers who valued the features and performance of the earlier-released PMCL camera, the GigE version not only incorporates the same features and performance but also provides networking flexibility and "grabber-less" operation.

About the CM-030GE RH
Sensor
Part of Jai's C3 Compact series, the camera is based on Sony's monochrome ICX424 1/3" progressive scan CCD with 0.3 million pixels and provides a standard GigE Vision / GeniCam-compliant digital interface. The CCD sensor is positioned in a remote head with a 2-meter-long cable making this camera suitable for space- or weight-critical machine vision applications.

Output
With 656 x 494 active pixels, the CM-030GE RH delivers 120 full frames/second in continuous (free-run) mode. Higher frame rates (up to 504 frames/second) can be achieved by using the partial scan modes or vertical binning mode.

Triggering
Multiple trigger modes are available in addition to continuous operation, including edge pre-select, pulse width control, frame delay, and reset continuous triggering. The camera also features a “sequence trigger” mode which enables users to pre-define multi-trigger repeating sequences where gain, shutter, and/or region of interest (ROI) is instantly changed as each new trigger in the sequence is received.

Flexible configuration
The programmable GPIO allows flexible configuration of inputs/outputs as well as the timer/counter function.

Packaged software
The CM-030GE-RH is supported by JAI’s own vendor-independent SDK and control tool software (Windows 7, Windows XP and Windows Vista), as well as being compatible with any GigE Vision / GenICam-compliant third-party software libraries and tools.

Where can I use the CM-030GE RH
Being compact and light, the camera is can be used in any situation where space, weight, network flexibility and cable length are critical, for example:
*** Robotics
*** Surface mounting (PCB pick-and-place)
*** Semi-conductor inspection
*** Surface inspection

The CM-030GE RH's features at a glance
Sensor 1/3” progressive scan – monochrome CCD
Resolution 656 x 494
Pixel size 7.4 µm square
Frame rate 120 frames per second. Up to 504 fps using the partial scan modes or vertical binning mode.
Output GigE Vision interface with 10 or 8-bit output
Size 29 x 44 x 75 mm (CCU). 17 mm dia. x 46 mm (head)
Weight 130 g + 120g (head with 2m cable)

 

  Adept Electronic Solutions are 'The Machine Vision and Imaging Specialists and distributor for JAI products in Australia and New Zealand. To find out more about the CM-030GE RH camera or any JAI product, please email us at: adept@adept.net.au, call us at Perth (08) 92425411 / Sydney (02) 99792599 / Melbourne (03) 95555621 or use our online contact us form.  

 

 

 

 

If you like this page, please recommend and share it.

Google+ Facebook Twitter More