|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| LQ-200CL Go to Jai Cameras Go to Near-Infrared cameras Go to Line Scan cameras Go to 4CCD cameras |
 |
Main attributes
Four channels: R, G, B and NIR
Currently the only industrial-grade 4-CCD line scan camera on the market,
the LQ-200CL
features a beam-splitter prism with hard dichroic coatings
incorporating four precisely-aligned, pixel-to-pixel CCD sensors. The
incoming light is split into 4 spectral bands (RGB + NIR) with each sensor
seeing, simultaneously and through the same optical path, exactly the
same point on the object at all times.
By adding an NIR sensor, the new camera makes it possible to identify
an even-wider set of defects on inspected objects as both surface and
under-surface can be examined.
The LQ-200CL's prism technology eliminates the
complex alignment and encoding issues associated with tri-linear line
scan cameras, (especially those related to off-axis viewing), variations
in conveyor speed, surface undulations or objects that roll or move as
they pass through the camera's field-of-view, saving time
and increasing efficiency.
More features
** Each
of the four sensors provides 2048 linear pixels (14 µm square) and
runs at a maximum scan rate of 19048 lines-per-second.
**
Built-in pre-processing functions such as flat-field correction that can
be set individually for all four channels
** Image
optimisation through the built-in gamma/gain correction functionality.
Each channel can be set individually
** One-push
automatic white balance
** Electronic
shuttering with individual controls for each channel
** Noise-reduction
circuit that improves signal-to-noise ratio by up to 3 dB (situation-dependent)
without losing spatial resolution
** Pulse-width
control model for substantially increased flexibility as one of three
shutter operating modes
** Increased
shutter sensitivity via the binning function that combines the values
of two adjacent pixels at the output stage
** Set-up
and installation aid with built-in test-pattern generator
**
Excellent temperature management through a ridged body that dissipates
heat and thereby optimises image quality
Made tough
As
with all other JAI line-scan cameras, the LQ-200CL has undergone extensive
shock ( to 50 G) and vibration testing (to 3 G) to maximise its ability
to withstand the rigors of industrial environments.
Click
to view video on the advantages of multi-imager prism technology
| Model | LQ-200CL |
| Sensor | 4 x 28.7mm CCD line scan sensors |
| Resolution | 4 x 2048 pixels |
| Pixel Size | 14µm x 14µm |
| Video Output | 4 x 8 bits or 4 x 10 bits through Camera Link |
| Max. Line rate | 19,048 lines-per-second at 40 MHz pixel clock |
| Shutter | Three shutter operating modes including pulse width control mode |
| Lens Mount | Available with M52 mount or Nikon F-mount |
| Operating temperature | -5°C to +45°C |
| Power | 12V DC to 24V DC ± 10% 12W at +12V (saturated) |
| Dimensions | 90 mm x 90 mm x 120 mm |
| Weight | 1050g |
JAI LQ-200CL Datasheet|
If you like this page, please recommend and share it. |
||
| More | ||
