Gocator 1300 series- High-Speed 3D Laser Point Profile Sensors
The Gocator 1300 series delivers high speed distance measuring devices that are simple to network and integrate. With a rugged design built to withstand the harshest of industrial environments, the Gocator 1300 is well equipped to handle your most demanding on-line inspection applications. The Gocator 1300 Series samples at a 32kHz scan rate at the highest resolution over a large measurement range (up to 2000mm). These sensors provide the ideal solution for dimensional and surface roughness measurements.

Easy to use, Gocator’s built-in GUI allows for flexible configuration of range settings using any web browser, computer or operating system. With no additional software to install, Gocator’s out of the box setup and configuration is fast and simple.

Applications
The Gocator 1300 is designed for highly-accurate small-parts inspection such as step-height, gap, roughness and coplanarity measurements common in electronics enclosure.

Benefits
• Pre-calibrated and ready to measure	• Scalable to a synchronised multiple sensor network	• Small footprint
• Setup & control via web browser	• Rich I/O & PLC support	• Open source SDK

Specifications	Gocator 1320	Gocator 1340	Gocator 1350	Gocator 1365	Gocator 1370	Gocator 1380	Gocator 1390
Scan rate	32,000
Interface	Gigabit Ethernet
Clearance distance	40	162.5	200	562	237.5	127	500
Measurement Range	20	95	200	375	412.5	127	500
Resolution Z (mm)	0.0004 - 0.0004	0.0005 - 0.0010	0.0015 - 0.0035	0.0025 - 0.0040	0.0025 - 0.0070	0.0100 - 0.0450	0.0250 - 0.0600
Vibration Resistance	10 to 55 Hz, 1.5 mm double amplitude in X, Y and Z directions, 2 hours per direction
Inputs	Differential Encoder, Laser Safety Enable, Trigger
Outputs	2x Digital Output, RS-485 Serial, Selcom Serial, 1x Analog Output (4-20mA)
Dimensions	49 x 75 x 162
Weight	0.75/0.8 kg	0.8	0.75/0.8 kg	1.0 kg	0.75/0.8 kg	0.75 kg	1.25 kg

Click here to download the Gocator 1300 series datasheet