Super
resolution in light starved conditions!
Go
to Teledyne Dalsa
Go to Line Scan Cameras
Go to Ultra-high resolution monochrome
Go to Time Delay Integration
| Linea
HS TDI cameras |
|
Modelled on multi array TDI technology, the Linea HS is a CMOS
TDI 16k camera that comes equipped with a 300 kHz line rate or
5GPix/sec data throughput to allow high-performance imaging applications
including PCB, wafer inspection, gene sequencing, digital pathology,
flat panel display and web inspection.
Linea HS TDI camera Product Manager Xing-Fei He, says multi-array
TDI architecture is a great solution for a wide range of imaging
applications.
Multi-array TDI technology provides cutting-edge
performance for today’s demanding vision applications. Various
selectable stage combinations of both arrays enable best imaging
results to meet different application requirements,” he
said.
This range of Linea HS cameras offers versatility with its Monochrome/HDR
imaging capable of both single and dual outputs and super resolution
imaging in conditions of poor light. The monochrome model's sensor
has two arrays with the primary array offering 128 stages and
the secondary, 64.
Key features:
• High speeds: 16/8k resolutions at 300 kHz line rate or
5GPix/sec.
• Camera Link HS fiber optic interface: for long cable data
transmission and high reliability.
• Active pixel-assisted alignment:
assists end-users to be precise when aligning samples under inspection.
• Minimal sound, high sensitivity.
• Monochrome/HDR imaging with single and duel outputs.
• Sychronized IO to control external lighting from the camera.
• Super resolution imaging to function in poor light conditions.
|
 |
Typical Applications:
• Digital pathology
• Printed circuit board inspection
• Flat panel inspection
Image: The Linea HS TDI allows you to fuse separate
images at
different exposures in order to adjust light balance.
| Specifications |
Linea HS 8K |
Linea HS 16K |
| Resolution |
8192 x 128 |
16384 x 128 |
| Lens Mount |
M58 x 0.75 |
M90 x 1 |
| Dynamic Range |
70 dB |
|
| Size |
76 mm x 76 mm x 85 mm |
97 mm x 140.5 mm x 78.6 mm |
| Mass |
< 500 g |
1.2 kg |
| Power Dissipation |
18 W |
30 W |
| Maximum Line Rate |
300 kHz |
| Pixel size |
5 µm |
| Operating Temperature |
0 °C to +65 °C
(front plate) |
|
|
|
 |
 |
Click here to
visit the family datasheet
Need a price or more application
information? Please email Adept
Turnkey or call our offices
Adept Turnkey Pty Ltd is"The Machine Vision and
Imaging Specialists" and distributor of Teledyne Dalsa products in
Australia and New Zealand.
To find out more about any Teledyne DALSA product, please call Adept Turnkey
at Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384
1775 or contact us online.
|
