Multispectral imaging: Getting the best of both worlds - RGB and mono output
the precision of colour AND sensitivity of monochrome
|Meet your demanding imaging need with Teledyne DALSA's Piranha4 2K quadlinear, multispectral camera|
Delivering the highest line rates in the industry with outstanding signal-to-noise performance, the Piranha4's Colour quadlinear CMOS sensor brings the best of both worlds by providing RGB imaging as well as a separate monochrome channel while also enhancing inspection capability in certain demanding applications. Minimum spatial separation provides the maximum in colour accuracy and performance.
In addition to its incredible speed, the Piranha4
also offers advanced features including subpixel
spatial correction, lens and shading correction, and flat field
The camera delivers a throughput of 573 MPix/s using Camera Link, and advanced chip sets allow cable lengths of 15 meters and beyond. The GenICam compliant interface makes the camera easier to set up, control, and integrate.
• Quadlinear multispectral RGB + mono CMOS line scan. Bi-directional
|• 100% print inspection (pharmaceuticals, bank note)|
|• 100% fill factor||• Electronics inspection|
|• Independent exposure control for each color||• Materials grading systems|
|• GenICam compliant||• Web inspection|
|• 2k resolution, 14.08 µm pixels||• High performance color sorting systems|
|• Multiple areas of interest||• Food inspection|
|• Sub-pixel spatial correction||• General purpose machine vision|
|• Small, robust, wide operating temperature range|
|• Line rates up to 70 kHz|
|• Low pass shading and lens correction, flat field correction|
|• Camera Link interface supporting cables to 30 meters|
|Quick specs||Piranha4 2k 70 kHz|
|2048 x 4|
|Total data rate||573 MHz|
|Max line rate||70 kHz|
|Pixel size||14.08 µm|
|Output format||Camera Link Base, Medium, Full or Deca|
Adept Turnkey Pty Ltd - Smarter Imaging for Better Lives - are distributors for Teledyne Dalsa imaging products in Australia and New Zealand. To find out more about Teledyne Dalsa or any other machine vision product, please call us at Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or contact us online.
If you like this page, please recommend and share it.