Protect
your vision investment with a IP67-compliant machine vision camera enclosure
Go
to Orca Industrial Camera Enclosures
Go to AutoVimation
Go to Accessories
ORCA
housings and accessories for protection against dust, water, high/low
temperatures
For large cameras
Manufactured from robust anodised aluminium, Orca
housings provide IP67-level protection for large cameras with cross
sections up to 62 x 62 mm.
With a small form factor and available in three lengths up to 250mm,
the enclosures are suited for all environments where components
cannott be freely mounted.
Designed with a choice of either 2" or 3" front windows,
the Orca enclosures enable the mounting of ring lights with diameters
up to 78mm. Additionally, the 3" front window can accommodate
wide-angle or telecentric lenses.
Special requirements
Users can select special
solutions for specific requirements; for example, there
are models available for fisheye or panamorph lenses
with an image angle of up to 200° and equipped with a dome window.
Orca enclosures for thermal imaging cameras featuring a 2”
or 3” infrared transparent Germanium window are also available.
Mounting brackets for large cameras can also be provided
|
Camera mounting
Orca camera mounting blocks are available
in 80mm lengths.
Internally, a flexible mounting position within the enclosure
enables installation of the camera at any angle and in any positron
and using autoVimation's construction kit, assembling and adjustment
of all vision components on any machine frame to the user's exact
requirements are possible. The
use of autoVimation's construction kit simplifies assembly and adjustment
of all components including those used in 3D applications
by using the triangulation building kit.
Rear wall options
Options include various back walls that can be fitted with large
cable glands.
Protecting against environmental influences`
Heat dissipation and control
Whereas other camera enclosures might increase camera temperature,
due to good thermal conductivity to the outer enclosure, a valuable
benefit of Autovimation enclosures is their patented heat-dissipation
feature with the ability to passively cool the
cameras up to 10°. Alternatively, for outdoor applications where
cameras are required to operate in extremely low temperatures, the
enclosures can be fitted with a controlled heating system that keeps
the camera at a minimum of 10 °C and so preventing camera damage.
Dust control
An air curtain can be mounted
to the front lid of Orca enclosures with a 2” front window
providing a clear view even in dusty environments.
|
Spider adapter Plate
for ring light mount |
Front
window options |
|
|
A ring light mount is
available for all Orca enclosures with 3" front window.
The Spider plate for Orca 3" allows ring lights with diameter
up to 78mm to be mounted directly into the front lid close to the
front window protecting the light and avoiding back reflection into
the camera lens
|
All Orca enclosures are available with 2" and
3" front windows.
The 2" window allows the attachment of the sind curtain with
the 3" window being suitable for wide-angle lenses. |
Special
features |
• Robust build aluminium extrusion
profile |
• Small form factor |
• Easy to integrate into existing machines |
• Flexible camera positioning (angle and position) |
• Dovetail profiles enable robust enclosure mounting
on all 4 sides along the entire profile |
• Mounting brackets resist a displacement
force of up to 3000N! |
• Assembly of ring lights with up to 78mm Ø
directly into 3" front lid possible |
• Compatible with a large range of accessories |
• High chemical resistance by using Viton, EPDM
and TPE sealing materials |
• Vibration-proof camera mounting with good
heat dissipation via a patented mounting system. |
General
features of Autovimation camera enclosures |
• Enclosures are only
a little larger than a camera with lens and connector |
• Good heat dissipation –
cooler inside this housing compared with free camera mounting |
• Different rear wall options allow
large connectors and/or multiple cables to the camera |
• Large range of mounting brackets allowing to
adjust the enclosure to any requirements |
Accessories
• Mounting kits 1-11
• Wind curtain and air nozzle Orca for dirty environments
• Water cooling and heating
• 90 degrees deflection mirror mount
• Adapter plate for 3" ring light in housing lid
• Electric heating plate with temperature control
• Positioning ring allows for repeatable camera assembly
• Triangulation building kit
|
|
|
|
|
90
° deflection mirror |
Wind
curtain |
Rear
wall options |
Adept Turnkey Pty Ltd are "The Machine Vision and Imaging
Specialists" and distributor of Autovimation products in Australia
and New Zealand. To find out more about any AutoVimation machine vision
product please call us at Perth (08) 9242 5411 / Sydney (02) 9905 5551
/ Melbourne (03) 9384 1775 or contact
us online.
|