|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
Save the CPU: A 3D smart camera with laser line peak detection on board and with sub-pixel accuracy
Go
to MV1-D2048x1088-3D03
Go to 3D Cameras
Go to Smart Cameras
Go to High Speed cameras
Go to GigE Cameras
Go to Ultra-high Resolution Monochrome
Cameras
Go to Photonfocus
Fast, 2.2 Megapixel 3D
SMART camera
with in-built FPGA calculation
of line position for laser triangulation applications
 |
With a further release of their 3D camera,
Photonfocus offer a 2.2 Megapixel CMOS camera with a Field Programmable
Gate Array (FGPA) providing the ability for on-board calculation
of line position and outputs the line position and qualification
information to each line position value. This smart camera was developed for laser triangulation systems with high triangulation rates and, along with Photonfocus' other 3D camera family members, is optimised for high sensitivity and with a robust algorithm for line determination. An added cost-advantage is the camera's GigE interface which allows the acquisition of 3D profiles without frame grabbers. |
 |
| The user is supported by the PF Suite 3D, a graphical user interface for a quick evaluation of the camera and a SDK for the implementation of the 3D CMOS camera. This new release is 100% backward compatible | ||
| Key features | |
| • Real time DUAL laserline Peak Detection algorithm on camera | • Additional peak information (width and quality) for scatter measurements |
| • Gigabit Ethernet Interface | • Board level or OEM solution available |
| • Dual Peak eliminates the need of a 2nd camera for various setups | • Scatter measurement with additional peak information possible |
| • Region of Interest | • Constant frame rate |
| • PF 3D Suite a free GUI for an easy system set up and visualisation of 3D scan | • Free PF 3D Suite: GUI for an easy system set up and visualisation of 3D scan |
| • Combined 3D and linescan mode | • Halcon toolkit available |
| • Reduction of vision system computer CPU load | • Extended trigger input and strobe output functionality |
| Quick specifications | |
| Sensor | CMOS, progressive scan, monochrome |
| Resolution | 2048 x 1088 pixels (2048 x 1024 for 3D measurement) |
| Pixel size | 5.5 µm x 5.5 µm |
| Spectral range | < 350 to 900 nm (to 10 % of peak responsivity) |
| Sensitivity | 5.56 V / lux |
| Frame rate | 348 fps* @ full resolution / 10204 fps* @ 2048 x 23 resolution |
| Interface | GigE |
| Operating temperature | 0°C ... +50°C |
| Power needs | Supply: +12 V … +24 V DC (±10 %). Consumption: < 5 W |
| Lens mount | C-Mount (CS-Mount optional) |
| Dimensions | 55H x 55W x 51.5L mm |
| Weight | 265 g |
| * Output 3D only with additional 2D line (max. 2048 x 1024) | |
Adept Turnkey Pty Ltd are "The Machine Vision and Imaging Specialists" and distributor of Photonfocus products in Australia and New Zealand. To find out more about any Photonfocus or other machine vision product please call us at Perth (08) 9242 5411 / Sydney (02) 9979 2599 / Melbourne (03) 9384 1775 or contact us online.
|
If you like this page, please recommend and share it. |
||
| More | ||
