Tech
note: From July 2010, JAI GigE cameras to
include Genicam SFNC standard
Go to JAI
JAI decision to produce GigE cameras with SFNC conformity
From July, 2010, all JAI gigE cameras will be released conforming
to the Genlcam SFNC (Standard Function Naming Convention) Version
1.2 standard. The decision was taken due to the widespread use of this
standard.
What are the implication for
me as the result of this adoption?
The main difference between the original JAI GigE cameras and those that
now conform to the SFNC standard, lies in the acquisition and trigger
and in the exposure-time control facilities.
If you are replacing an existing camera with an SFNC-compliant GigE camera,
changes to the function name and the setting method will need to be made
to your current software in accordance with SFNC conformity. Full
details are available via pdf. This document will explain, in
detail, the differences between the new JAI GigE Vision cameras trigger
setup compared with the original, proprietary method.
Will my currently-deployed cameras co-exist
with any new ones I may choose to add to the same configuration?
The SFNC standard cameras will not co-exist with any non-conforming cameras
currently in use. So what do I do?
If there is a decision to expand/update your camera deployment, please
speak to Adept for advice on how best to maximise functionality
and benefit from the change-over without unduly disrupting your workflow.
What if I want to add a new, conforming
camera but prefer to have it work with my existing system?
If you choose to acquire a new SFNC-conforming GigE camera but need it
to co-exist with non-conforming cameras, rather than upgrade all of them,
a "downgrade" tool will be made available on the Jai web site.
This downgrade tool returns SFNC-conforming cameras to the original, conventional
JAI GigE camera.
Are there any JAI GigE cameras that do not
conform to SFNC standard?
The CV-A10GE, CV-A70GE and the CV-M9GE
do not conform and, for those cameras, it is business as usual.
Adept Electronic Solutions are "The Machine Vision and Imaging
Specialists" and distributor of JAI products in Australia and New
Zealand. To find out more about any JAI machine vision product please
email us at: adept@adept.net.au
or call us at Perth (08) 92425411 / Sydney (02) 99792599 / Melbourne
(03) 95555621 or use our online contact
us page.
|