OEM modules: For embedded solutions
where customized OEM camera modules with different dimensions, components
and features are are a flexible option. |
OEM-D1312(IE)-40-LC |
OEM-D1312(IE)-80-LC |
OEM-D1312(IE)-160-LC |
OEM-D1312(IE)-240-LC |
The OEM-D1312(IE) series is based on the Photonfocus CMOS image sensors
A1312 and A1312IE which is the NIR enhanced version of the A1312. The
sensors have with a full well capacity (FWC) of 90 ke-, are optimized
for high dynamic range applications, have a high signal-to-noise ratio
(SNR) and have a parallel interface based on the AIA standard. Four camera
models with different speed grades are available.
Note: The A1312I image sensor is available on request.
All features and technical data are identical to the standard cameras
except for the interface board which is not included.
OEM Module Properties |
|
• Configurable region of interest (ROI) - up to 512 and decimation |
• 2 look-up tables (12-to-8 bit) on user-defined image region
(Region-LUT) |
• 3 x 3 convolver for image pre-processing in the camera |
• Integrated digital reduction of fix pattern noise (FPN) |
• Integrated shading correction |
• Temperature monitoring of sensor and camera |
• Crosshairs overlay on the image |
• Ultra low trigger delay and low trigger jitter |
Model |
OEM-D1312 (IE) |
Resolution |
1312 x 1082 1.4 megapixel resolution |
Sensor |
1"” monochrome CMOS |
Pixel Size |
8 µm x 8 µm |
Video Output |
Low voltage CMOS (LVCMOS) |
Max Frame Rate |
37 / 55 / 108 / 170 fps |
Pixel Scan |
40 / 80 MHz |
Operating Temp |
+0 °C to +50 °C |
Dimensions |
54 x 44 mm² (W x H) |
Spectral range |
Spectral range: 370 - 1000 nm A1312. Spectral range: 370 - 1500
nm A1312IE |
LinLog® response curve (linear-logarithmic sensor
characteristics) |
Photonfocus OEM-D1312(IE) Camera Datasheet
|