|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
Piranha3
16K: First CMOS line scan camera delivering unprecedented speed with low
noise and high dynamic range
Go
to Piranha3 16k
Go
to Line Scan Cameras
Go
to Teledyne DALSA
Raising resolution and speed to a new level
Ideally suited for the inspection of large area, flat-panel
displays, printed circuit board and high-performance document scanning,
the new Piranha3 16k delivers unrivalled precision and speed within a
compact form factor of 150 x 80 x 77 mm.
Using Teledyne DALSA's proprietary CMOS sensor architecture, the Piranha3
16k is able to meet the market's increasing demand for higher resolutions
and speeds using a single, extended cable solution in a low-cost package.
To deliver its full bandwidth, the Piranha3 16k uses the new HSLink (Cameralink
HS) machine vision connectivity interface, which enables higher throughput
speeds than before in the same amount of time.
| Key
features and benefits |
||
| ** High resolution; high speed | ** Low price-per-pixel system solution | ** On-chip ADC and CDS |
| ** High speed HSLink interface | ** Software-controllable,camera configuration parameters | ** Cost-saving: more detail with fewer cameras |
| Typical
applications |
||
| ** Flat-panel display inspection | ** High-performance document scanning | ** High throughput applications |
| ** Printed circuit board inspection | ** Parcel sorting | |
| Quick specs | Piranha3 16k
|
| Resolution | 16 384 pixels |
| Sensor | CMOS line scan |
| Pixel size | 3.5 µm x 3.5 µm |
| Data rate | 1,179 MPix/s (16k40), or 655 Mpix/s (16k20) |
| Line rate | 72 kHz Max (16k40), or 40 kHz Max (16k20) |
| Dynamic range | 65 dB |
| Output | HSLink (Cameralink HS) |
| Lens mount | M72 x 0.75 |
| Dimensions | 80 mm (W) x 150 mm (H) x 54 mm (D) |
| Operating temperature | 0 °C to 50 °C, measured at the front plate |
Adept Turnkey Pty Ltd are "The Machine Vision and Imaging Specialists" and distributor of Teledyne Dalsa in Australia and New Zealand. To find out more about any LMI machine vision product please email us at: adept@adept.net.au or call us at Perth (08) 92425411 / Sydney (02) 99792599 / Melbourne (03) 95555621 or use our online contact us page.
|
If you like this page, please recommend and share it. |
||
| More | ||
