|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
| VC-4066 Back to Vision Components Cameras Back to High Resolution Monochrome Cameras |
 |
The VC4066 is one of the world's fastest and most excellent smart cameras with computational power of 3200 MIPS rivalling a 2.6GHZ Pentium. It has 32 MB DRAM, 4 MB Flash EPROM for program and data storage (Expanded by the standard 128MB SD card inside).
It can acquire full frame 1024 x 768 pixels at 30 frames per second!
The own internal operating system ''VCRT'' of the VC4066 is multitasking. This means that multiple processes can be executed in parallel.
The camera has also a High Speed Trigger input with absolute constant capture delay, which allows absolutely jitter-free image acquisition even at very high speed processes.
And whereas a standard progressive scan camera gets a trigger, starts exposure and then reads out the pixel data, the VC4066 has optimized the image acquisition process so that exposure, readout and the image processing can be done in parallel.
It has an 8 bit colour overlay which can operate in opaque or semi-transparent mode so that you can block out or still see the underlying image.
All Vision Components cameras are built for industrial applications. They are insensitive to shock and vibration, and have multiple I/O lines for direct control of external equipment. For more complex control tasks, they can easily be interfaced to a PLC.
| Model | VC-4066 |
| Resolution | 1024(H) x 768(V) Pixel |
| Sensor: | 1/3" CCD |
| Shutter: | High-speed: up to 10 µsec Low-speed: up to 20 sec adjustable integration time |
| Integration: | Full Frame Progressive Scan |
| Frame rate: | 30 fps (60 fps with 2 times binning) |
| Acquisition: | Asynchronous, program controlled or external trigger, full frame |
| A/D conversion: | 1 x 33 MHz / 10 Bit |
| Processor: | 3200 MIPS, 400 MHz Texas Instruments TMS320C64xx |
| Image display: | B&W or pseudocolor from 3x8 bit RGB lookup table |
| Image/Data memory: | 32 MBytes SDRAM |
| Flash memory: | 4 MBytes Flash EPROM (non volatile memory) for programs and data, programmable in the system |
| Dig. I/O’s: | 4 inputs / 4 outputs optically decoupled 24V, outputs 4 x 500mA |
| Interfaces: | RS232 up to 115.200 Baud max. and 100Mbit Ethernet |
| Video output: | SXGA monitor 1280x1024 |
| Supply voltage: | 24V +/-20% DC, max. 300 mA |
| Electrical connections: | I/O (DC IN, PLC, 12-pin), V24 (6-pin), Trig (Trigger/keypad, 6-pin), VGA Out (10-pin) |
| Dimensions: | ca. 120 x 50 x 35 mm, ca. 250 gr. |
Vision Components VC-4066 Camera Datasheet|
If you like this page, please recommend and share it. |
||
| More | ||
