Linea
HS offering super resolution in light starved conditions!
Back
to Newsletter
Go to Teledyne Dalsa
Go to Line Scan Cameras
Go to Ultra-high resolution monochrome
Go to Time Delay Integration
Linea
HS 4K offering rapid line rates of 300 kHz |
|
The Linea HS is an award winning TDI series
by Teledyne Dalsa that is designed for high-speed and high-sensitivity
imaging. The Linea HS 4k Monochrome/HDR
CameraLink HS (CLHS) fiberoptics camera uses Teledyne Dalsa's
charge-domain CMOS TDI sensor with a 5x5 µm pixel. Its
equipped with direct fiberoptic outputs
using LC connectors.
The new Linea HS uses the next generation CLHS data interface
that delivers the industrys highest data throughput. Standard
fiberoptic cables enable longer cable lengths that eliminate the
need for repeaters and significantly improve data reliability,
while reducing system costs.
Click
here to learn more about Teledyne Dalsa's Linea HS family of line-scan
cameras.
|
|
|
|
|
|
|
Pair with Xtium2 frame
grabber for higher frame rates
|
|
When combined with the Xtium2 the Linea HS brings your imaging system
the power of the PCIe Gen 3 platform. With the high efficiency of
the CameraLink HS interface's X-protocol, the Xtium2 CLHS PX8 supports
Active Optical Cable (AOC) and industry standard CX4 cables with
up to 7-CLHS lanes, each operating at 10.3 Gbits/s, to acquire images
at up to 8.4 GBytes/s.
|
|
Camera Software: Sapera
LT
|
Sapera LT is an image acquisition control software development
toolkit for Teledyne Dalsa's cameras and frame grabbers. Hardware
independent, Sapera offers a rich development system for machine
vision OEMs and system integrators. Sapera supports image acquisition
from cameras and frame grabbers based on standards including GigE
Vision, CameraLink, and CameraLink HS.
|
Key Features:
|
High speeds: 300 kHz
line rate
|
Teledyne Dalsas
multi-array charge-domain CMOS TDI sensor
|
High sensitivity
|
Mono/HDR modes for
high dynamic imaging
|
Supports active optical
cables (AOCs) for extended cable lengths to 100M
|
Next generation Camera
Link HS interface with field proven data reliability
|
Multi-camera
support from Teledyne DALSAs frame grabbers
|
|
Typical Applications
|
Life sciences
|
Semiconductor wafer
inspection
|
Printed circuit board
inspection
|
General web
inspection
|
|
|
Specifications
|
Linea HS 4K
|
Sensor type |
Multi-array charge-domain CMOS TDI |
Resolution |
4,096 x (128+64) pixels |
Pixel size |
5x5 um |
Peak responsivity |
500 DN/(nj/cm2) @ 1x gain in 8 bit (main
array) |
Max line rate |
300 kHz (mono mode), 150 kHz (HDR mode) |
Bit depth |
8 or 12 bit selectable |
Dimension |
76(W) x 76(H) x 85(D) mm |
|
|
Need a price or
more application information? Please
email Adept Turnkey or call our offices
Adept Turnkey Pty Ltd is "The Machine
Vision and Imaging Specialists" and distributor of Teledyne
Dalsa products in Australia and New Zealand. To find out more about
any Teledyne Dalsa product, please call Adept Turnkey at Perth (08)
9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or
contact us online.
|
|
|