Calibir
GX Family - perfect for thermal imaging systems
Equipped with a microbolometer sensor, The Calibir
GX camera family by Teledyne Dalsa is perfectly suited to a range
of thermal applications. With great sensitivity in longwave infrared
range (8-12 µm), it features both shutter and shutterless
operation and rapid image output on power up while delivering uniform
response over the entire operating temperature range, making it
an ideal component for thermal imaging systems requiring uninterrupted
image acquisition. The GX series also offers our own advanced 21-bit
ADC design for unparalleled intra-scene dynamic range without the
need for a gain reduction, allowing for the best possible NETD over
a vast range of temperature (>600C).
Key Features Radiometric
operation for precise temperature output
21 bit ADC for immense intra-scene
dynamic range
Gigabit Ethernet (GigE) Contact
us for other options (MIPI-CSI2)
General purpose opto-coupled
input/ output (external trigger, count, or timer driven triggering).
Flexible general purpose Counter
and Timer functions for internal/external controls
Defective Pixel replacement
Adaptive Image Enhancement
IEEE1588-2008 Precision Time
Protocol synchronization capable
Built-in Pseudo-colour for
enhanced visualization
Image metadata supported
Application development with
the freely available Sapera LT software libraries
Internal mechanical shutter
for remote recalibration
Typical Applications
Welding
Detecting elevated
body temperature
Sintering
Baking
Smelting
Firefighting
General Specifications
Resolution
320 (H) x 240 (V) or 640 (H) x 480 (V)
Frame Rate
30/60 Hz
Pixel size
17 µm
Temperature Accuracy
GXM: non-radiometric
GXF: +/- 1°C accuracy from 25 to 45°C
size
29 mm x 37 mm x 59 mm
Bit depth output
8 or 12 bit depth selectable
Need a price or
more application information? Please
email Adept Turnkey or call our offices Adept Turnkey Pty Ltd is "The Machine
Vision and Imaging Specialists" and distributor of Teledyne
Dalsa products in Australia and New Zealand. To find out more about
any Teledyne Dalsa product, please call Adept Turnkey at Perth (08)
9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or
contact us online.
If you like this page, please recommend and share it.