Alvium embedded vision starter kit from Allied Vision and MVTec

Go to Allied Vision
Go to MVTec
Go to Alvium Series
Go to High speed cameras
Go to Ultra-high-resolution colour cameras
Go to Ultra-high-resolution monochrome cameras
Go to High-resolution colour cameras
Go to High-resolution monochrome cameras
Go to Standard-resolution colour cameras
Go to Standard-resolution monochrome cameras

Ready-to-use Alvium Starter Kit to develop your application

 


Allied Vision have joined forces with MVTec to produce the Alvium embedded vision starter kit. The kit enables developers to begin developing immediately without the need to design and build specific customised components of the system. MVTec's contribution simplifies the initial development and testing of the system and with the purchase of HALCON enables development of a full custom application.

Camera Kit contents:
Hardware:
- Alvium 1500 C-120c colour camera with S-Mount and open housing
- Allied Vision lens S-6-F1.8-5MP-T1-2.5-IRC
- 420mm CSI-2 flex cable
- CSI-2 Adapter Board for NVIDIA Jetson Nano / Xavier NX Dev Kit
- Alvium tripod mounting plate
- PCB Triangle for demo applications

Software:
- Machine Vision Software MVTec HALCON * (in form of a browser-based demo application and executable without additional license)
- MIPI CSI-2 Driver
- Pre-configured SD card image

* With the starter kit, users can run the pre-installed application examples. Developing custom applications using HALCON's extensive toolbox is possible with a development license of MVTec HALCON not included.

        
   
In order to get the demo working, a customer will still have to buy the following:
- NVIDIA Jetson Nano development Kit
- Power supply for DevKit and CSI-2 Adapter
- Camera tripod with mounting
- SD Card (32 or 64 GB)

The special items in this kit is the triangle provided. This triangle (with the free demo software from MVTec) will showcase the following functions:
1. Matching
2. Bar code reading
3. Pose estimation (shows the x, y, z orientation)
4. Deep Learning (able to determine if PCB is front or back side)



 

 

 

 



  

The demo software will only perform the above, and you are not able to build a system around it. For a custom application, a full licence is required. However,
this demo allows the customer to have an understanding of the possible functionality so they would know which licence to purchase.


Need a price or more application information? Please email Adept Turnkey or call our offices
Adept Turnkey Pty Ltd are "The Machine Vision and Imaging Specialists" and distributor of Allied Vision products in Australia and New Zealand. To find out more about any Allied Vision product, please call Adept Turnkey at Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or contact us online.