AT logo - The Machine Vision Specialists  
  Frame Grabbers  
  Vision Systems  
  Contact AT  
  Site Map  
Request product information


(08) 9242 5411

(02) 9905 5551

(03) 9384 1775

Defence Recognised Supplier Scheme Logo


New approach to customised Multispectral Area Scan Cameras

Go to Product Page
Go to High Speed Cameras
Go to High Resolution Colour
Go to High Resolution Monochrome
Go to Ultra High Resolution Colour
Go to Ultra High Resolution Monochrome
Go to Jai Cameras

The innovative Fusion Flex by Jai

Introducing the Fusion Flex by industrial camera manufacturer Jai. A new camera concept that empowers vision system designers with the ability to choose where and how wide the wavebands are. The Fusion Flex leverages Jai's powerful FusionSeries 2-CMOS and 3-CMOS prism-based multispectral cameras.

With the Fusion Flex users can access powerful inspection techniques with cameras fine tuned that looks at specific features. This can reveal new and additional imaging information as well as reduce cost and time to develop an application.

By combining the new innovative Flex-Eye customisation process with Jai's Fusion Series cameras users can access new, powerful techniques on a well-proven and reliable camera platform.

Jai offers an easy-to-use online configurator to customise your camera. In a simple step-by-step process you select the number of sensors, the resolution and whether Bayer or monochrome sensors are to be used in the visible spectrum. Then the intuitive GUI lets you drag and place your wavebands on a spectral chart at required wavelength locations, and then select the width of those wavebands.


Key Features
• Multispectra 2 or 3-CMOS prism cameras that allow for customisation of wavebands for a specific application.
• 2 or 3 wavebands located anywhere between 405-1000 nanometers (nm).
• Wavebands can be as narrow as 25 nm at increments of 5 nm.
• Easy to use on-line configurator for smooth project start-up.
• Option to use Bayer sensor in visible spectrum to provide additional spectral data.
• Low-noise Sony PregiusTM IMX273 (1.6 megapixels) or IMX252 (3.2 megapixels) per waveband.
• 10GBASE-T GigE Interface (GigE Vision and GenICam compliant) auto-negotiates to lower speeds as needed.
• Precision Time Protocol support
• Single- and multi-ROI modes.
• Separate or unified control of key camera parameters for each channel.
Surgical Systems
To guide operation, surgical systems are increasingly using fluorescence compounds in blood vessels or surrounding tissues to highlight areas which will then be overlaid on the surgeon's visible colour image.
Autonomous weed removal
and crop health analysis
Systems designed for autonomous weed removal or the analysis of crop health via NDVI (Normalized Difference Vegetation Index) or NDRE (Normalized Difference Red Edge) formulae must feed a combination of visible and NIR wavebands to their algorithms to identify weeds from seedlings, or to mark healthy crops from those needing additional water or fertilizer.
Food Inspection
Highly functional in inspecting moisture content, bruising and foreign objects effectively increasing yield and productivity all while reducing waste.
Meet strict regulations and critical safety demands within pharmaceutical industry via reliable quality assurance routines during production of pills and liquid medicines.
1/2.9” 2-CMOS global shutter (IMX273)
1/2.9” 3-CMOS global shutter (IMX273)
1/1.8” 2-CMOS global shutter (IMX252)
1/1.8” 3-CMOS global shutter (IMX252)
Frame rate, full frame
226 frames/sec. @ 8-bit
213 frames/sec. @ 8-bit
123 frames/sec. @ 8-bit
107 frames/sec. @ 8-bit
Active pixels
1440 (h) x 1080 (v) x 2 sensors
2048 (h) x 1536 (v) x 2 sensors
Pixel Size
3.45 µm x 3.45 µm
Active area
4.97 mm (h) x 3.73 mm (v) - 6.21 mm diagonal
7.07 mm (h) x 5.30 mm (v) - 8.83 mm diagonal
Dimensions (H x W x L)
62 mm x 62 mm x 86.5 mm (excl. connectors)
GigE Vision 2.0
Lens Mount
Need a price or more application information? Please email Adept Turnkey or call our offices
Adept Turnkey Pty Ltd is "The Machine Vision and Imaging Specialists" and distributor of Jai products in Australia and New Zealand. To find out more about any Jai product, please call Adept Turnkey at Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or contact us online.







If you like this page, please recommend and share it.

Google+ Facebook Twitter More