AT logo - The Machine Vision Specialists  
  Frame Grabbers  
  Vision Systems  
  Contact AT  
  Site Map  
Request product information


(08) 9242 5411

(02) 9905 5551

(03) 9384 1775

Defence Recognised Supplier Scheme Logo


Teledyne DALSA's Linea 2k/4k: Defying GigE bandwidth limitations

Go to Linea 2k 52 kHz and Linea 4k 26 kHz
Go to Line scan cameras
Go to GigE cameras
Go to Teledyne DALSA

Powerful enough to use anywhere
Affordable enough to use everywhere

Bottle inspection Materials inspection Parcels and logistics Pharmacology inspections

Advanced features at unprecedented price points
Helping improve imaging and lower costs, Linea starts with an advanced CMOS sensor with high quantum efficiency and low noise for better images and comes packed with advanced features to make machine vision projects more easily achievable.

Deploying GigE technology
Teledyne DALSA's latest addition to their Linea range of line scan cameras are loaded with features for improved system performance, ease of use and set up flexibility; but, most notably, Teledyne DALSA's latest technology delivers high-speed data transfer that breaks through the GigE bandwidth limit without changing your GigE network.

Using an advanced data-modeling technique, transfers, up to several times faster than standard GigE Vision speeds, are achieved with no loss of image quality. These breakthrough line rates are possible by using proprietary technology that formats data from the sensor to optimize throughput and so take full advantage of both the sensor's maximum line rate and the camera's maximum GigE transfer speed. And all that is achievable at a compelling price-point compared with other mainstream line scan cameras.

Linea Mono 2k 52 kHz and 4k 26 kHz GigE cameras
Based in advanced CMOS line scan technology, Linea GigE employs a single line 2k or 4k, single line 7 µm x 7 µm pixel array and a line rate of up to 80 kHz and surpasses the requirements of demanding applications such as materials grading and inspection, transportation safety and general-purpose machine vision. (See specs below).

Advanced features
Low cost and compact
Patent-pending TurboDrive makes line rates up to 80 kHz possible
Multiple GPIO Timers and counters
User-selectable, End-of-line metadata
Line trigger timestamp
I/O status per line
High responsivity in visible with enhanced NIR responsivity
Up to four Areas of Interest, for data reduction
Cycling mode: Cycle through preset camera parameters, gain, exposure time, I/O outputs and FFC for each line
Extended dynamic range: Camera combines short and long exposure images, outputs image with high contrast in both dark and bright areas which increases the likelihood of defect detention.

Burst mode: Linea's GigE models can take advantage of its high speed sensor by capturing and buffering high speed bursts faster than GigE allows

Quick specs
Linea Mono 2k 52 kHz
Linea Mono 4k 26 kHz
2048 x 1
4096 x 1
Line rate
Up to 80 kHz, using TurboDrive and the Sapera LT driver
7.04 µm
Data format
8- or 12-bit selectable
320 DN / (nJ / cm2) in 12 bit at 1x gain
Dynamic Range
> 60 dB
Nominal gain range
1x to 10x
Lens mount
M42 x 1, C and F-mount adapters available
12 V to 24 V DC, HD15 connector (shared with I / O)
Operating temp
0 °C to 65 °C (front plate)
62 mm x 62 mm x 46.7 mm
<280 gr
GigE Vision v1.2; Sapera LT or 3rd party GenICam™ compliant SDK

Adept Turnkey Pty Ltd are "The Machine Vision and Imaging Specialists" and distributor of Teledyne DALSA products in Australia and New Zealand. To find out more about any Teledyne DALSA product, please call us at Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or contact us



If you like this page, please recommend and share it.

Google+ Facebook Twitter More