|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
Meeting the requirements of fastest data transfer and real-time machine vision with Coax
Go to
CP80-25-M-72
Go to CP80-25-C-72
Go to Optronis
Optronis
CamPerform CP Series
High-speed and long distances with full data rate via CoaXPress
 CP80-25-M-72
and CP80-25-C-72Described by the manufacturers as "a hot-shot in machine vision", Optronis' CamPerform series are equal to tasks that require measuring accuracy extending to the nano range and production speeds that are barely visible to the eye. Used for process analysis and fault detection where slower cameras no longer offer a solution, the CamPerform series is available with CoaXPress interface and meets the GenICam standard providing especially easy and standardised integration. Simple and standardized; flexible and user-friendly Designed to be as simple as possible leaving the user to concentrate on analyzing image data, the CP CoaXPress series supports the GenICam standard providing a system that is easy to configure. The series' well-conceived design is backed by a high degree of transparency and a development process that is recognized across industry and adheres to a standardized methodology that has been specified for gauging and describing the specifications for cameras and image sensors. |
CP80-25-M-72
- Mono CP80-25-C-72 - Colour |
|||
| Resolution | 5120 x 5120 | |||
| Frame rate | 72 fps (10-bit) | |||
| Frame rate | Reduced res. 500 fps @ 1920 x 1080 | |||
| Sensor | CMOS - Global and rolling shutter | |||
| Pixel size | 4.5 µm square | |||
| Lens mount | F-, C-, M42-mount, custom | |||
| Power | Power over CoaXPress, 24 VDC / 12 W | |||
| Temperature | +0 °C to +45°C housing | |||
| Dimensions | 85 x 85 x 65 mm without mounting | |||
| Weight | 500 g without mounting | |||
| The
benefits of CoaXPress |
||||
| Optronis' CoaXPress interface | CamPerformance
general features |
|||
| Cable | • 75 Ohm
coaxial (eg RG59, RG6, RG11 |
Real-time
machine vision with CoaXPress |
||
| • Long cable lengths in excess of 100 m without needing hubs, repeaters etc | •
Data rate of 2 GB/sec |
|||
| • Low cost assembly and easy integration in moving arm applications | •
4 to 25 MP resolution |
|||
•
Distances of over 200 feet at full data rate |
||||
| Trigger | • Read time data transfer, control and trigger | |||
| • Low jitter and latency | GenICam
standard for easy integration |
|||
•
Standardized configuration |
||||
| Bandwidth | • 6.25 Gbit/s scalable up to 4 channels with 25 Gbit/s in total | •
Clearly laid out user interface |
||
•
Standardized descriptions of camera features |
||||
| Power | • Power-over CoaXPress up to 13 Watt (PoCXP) | |||
Industry-standard
design |
||||
| Protocol | • Automatic link detection with frame grabber | •
No ventilation slots |
||
| • GenICam standard (XML file support and Plug&Play for machine vision) | •
Standard lens mount (C/F mount, M42) |
|||
•
Sturdy camera housing |
||||
| Connectors | • Standard BNC or DIN 1.0/2.3 | |||
image
processing. Typical
applications |
|||||
• Chip manufacturing (front-end,
back-end) |
• 3D laser triangulations | • 2D and 3D AOI | |||
| • FPD/PCB/SPI profilometry and metrology | • Research and science | • Robot vision | |||
 |
 |
 |
|||
Adept Turnkey Pty Ltd - Smarter Imaging for Better Lives - are distributors for Optronis imaging products in Australia and New Zealand. To find out more about Optronis or any other machine vision product, please call us at Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or contact us online.
|
If you like this page, please recommend and share it. |
||
| More | ||
