NEW
HALCON interface to access all USB3 Vision-compliant cameras
Go to Halcon
11 software
Go to Machine vision software
Go to MVTec software
Now available from Adept: Halcon USB 3 interface
download
|
The new universal HALCON USB3 Vision interface is available for
HALCON 11 on Windows 7/8 (32-bit and 64-bit). This interface
allows access to all cameras that comply with the USB3 Vision standard.
Key benefits of USB3 Vision
• High bandwidth in excess of 350 MB/s
• Easy-to-use plug and play interface
• Power and data over the same passive cable
• Easy software access via the well-established GenICam programming
interface
• Hardware and software from different vendors work seamlessly
over USB 3.0 connections.
• Validated by the AIA test procedures. |
Note: following the standard
practice with USB devices, the HALCON USB3 Vision interface will install
a HALCON-specific device driver when connecting to a new camera the
first time |
Please contact us for download
Adept Turnkey Pty Ltd are "The Machine Vision and Imaging
Specialists" and a distributor of MVTec software products in Australia
and New Zealand. To find out more about MVTec products or any other
machine vision product, please contact
us or call Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne
(03) 9384 1775
|