|
||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
Protect your vision investment with a IP67-compliant machine vision camera enclosure
Go
to Salamander Industrial Camera Enclosures
Go to AutoVimation
Go to Accessories
Salamander
housings for protection against dust, water, high/low temperatures
and with applications in food/phamaceutical industries
| AutoVimation's Salamander is a solution that simplifies the installation and adjustment of image processing components. The product range includes compact, easy-to-intgrate housings providing optimal protection for cameras and lenses in industrial applications while also ensuring good heat dissipation. | ||
 |
Providing IP67 protection for compact cameras
47 x 29 mm to 40 x 40 mm (width x height) cross section,
the Salamander series features a broadband, antireflective
coated, anodised aluminium enclosure built with a robust extrusion
profile. Flexible camera orientation and positioning inside the housing The camera is quickly and easily contained within the enclosure via a flexible mount, ensuring the lens always remains close to the front window. Turning the camera inside the housing allows simple correction of the image angle. Passive cooling system The enclosure passively cools the camera by working like a large heat sink and dissipating the heat to the outer housing. Whereas standard enclosures without heat dissipation can overheat the camera, AutoVimation's housing effectively lowers the camera temperature by around 12°C. |
 |
|
Salamander
enclosure with wind curtain |
Enclosure
with camera in- situ |
|
| Available in various lengths
starting at 130 mm the camera can be easily installed into the enclosure
with AutoVimation's patented Quicklock and heat guide mounting system.
These mounting elements also dissipate the heat created by the installed
camera. Mounting cameras of different heights is easily done by a
combination of different Quicklock elements and are available for
any camera height from 29 to 38mm. A wide range of mounting brackets
allows users to adapt the camera installation to any application. Conduit tubes and separable cable glands allow for the waterproof insertion of cables with various connectors up to a maximum diameter of 23 mm into the enclosure. Within the enclosure, the camera can be positioned anywhere along its central axis and at any required angle. Salamander enclosures are based on the standardized “Mechanical Machine Vision Interface” (MMVI) developed by AutoVimation, which allows for all compatible image processing components to be connected directly with the enclosure and so eliminating the time-consuming manufacturing of dedicated light holders. |
||
| Key features |
||
| • Robust build withstands displacement forces of up to 3000 N | • Small form factor in different lengths | • Flexible camera angle and positioning |
| • Compatible with a large range of accessories | • High chemical resistance | • Flexible, fast and vibration-proof mounting |
| • Good heat dissipation - camera cooler inside than if free-mounted | • IP67 protection to 1m for up to an hour | • Different rear wall options allowing large connectors and/or multiple cables |
| • Room for large lenses and even ring lights | • Large range of mounting brackets allowing for tailoring to requirements | |
 |
 |
 |
 |
Salamander
enclosures with components |
Mounting
element |
Mounting
kit 7 |
Salamander
60mm extension |
Feuersalamander for food and pharmaceutical industries |
||
 |
Stainless
steel, corrosion-resistant and "corner free" |
 |
Feuersalamander
enclosure |
Corner-free
mount for Feuersalamander enclosures |
|
| The Feuersalamander enclosure offers 150mm length space for camera, lens and connectors. Using the Quick-Lock / Heat- Guide mounting system allows the camera to be positioned in any position while keeping the lens in the correct place behind the front window, and at any rotational angle. | ||
Special
features |
||
Camera
enclosure |
Camera
mounting blocks |
|
| • Electropolished compact IP66 / IP67 food graded V4A stainless steel enclosure | • Few corners and edges for easy cleaning and low chance of accumulating dirt | |
| • Smooth surface without any corners where dirt could accumulate | • Covered mounting threads | |
| • Special pharmaceutical cable gland available | • Flexible mounting – attaches anywhere along the enclosure | |
| • Especially corrosion resistant using an steel alloy usually used for surgical instruments | • Electropolished surface for minimal attachment of bacteria | |
| • Flush front window and silicone seal | • Compact – adding only 5 to 10mm to the housing diameter | |
Adept Turnkey Pty Ltd are "The Machine Vision and Imaging Specialists" and distributor of Autovimation products in Australia and New Zealand. To find out more about any AutoVimation machine vision product please call us at Perth (08) 9242 5411 / Sydney (02) 9979 2599 / Melbourne (03) 9384 1775 or contact us online.
|
If you like this page, please recommend and share it. |
||
| More | ||
