3D capture: New-release Gocator firmware version 3.3 now available. FREE
Expanded built-in tools
with new support for advanced functions
About Gocator 2000
and 2300 series
Gocator is a family of all-in-one 3D smart sensors designed to
be easy to use yet very powerful and pre-calibrated to scan and measure
within minutes making Gocator accessible to all levels of expertise.
From factory floor production staff to technicians and engineers, the
Gocator embedded web browser interface enables setup to measurement
in minutes.
Sensors are easily configured using an intuitive and responsive interface
enabling the user to measure almost immediately, features like width,
thickness, and angle in 3D and much more.
Gocator’s suite of built-in measurement tools makes it easy to
inspect materials, improve quality control, and introduce 3D factory
automation solutions at low cost.
What's
new |
|
|
EtherNet/IP |
Gocators are now certified
to communicate with a wide range of PLCs, including Allan-Bradley
and Omron, via the industry standard EtherNet/IP protocol. Making
it even easier, no software programming is required. |
|
|
Gap and Flush measurement tool |
The Gap and Flush tools measure
the distance between two sharp or curved edged panels as well as
how flush two surfaces are relative to each other. With this new
toolset you can easily measure, set tolerances, and make inspection
decisions without costly external inspection units. For applications
like automotive production, inspecting the fit and finish of assembled
panels has never been easier. |
|
|
Groove measurement tool |
In many applications, like
the production of tires, plastic container lids, or tongue and groove
materials, for example, grooves are essential to the product's performance.
The Groove measurement tool measures the width and bottom of V and
U shape grooves and gives users the ability to accurately set pass
/ fail conditions and inspection decisions based on these measurements.
Using the Groove Measurement tool users can ensure their grooved
product's performance. |
|
|
Rotated measurement tool |
The Rotated Box tool makes
it possible to accurately measure an object in whole part mode even
if it's not perpendicular to the laser line during scanning. Users
can measure an object's true width and height by accounting for
its angle of rotation. In applications like packaging inspection
for example, you'll be able to spend more time making final measurements
without worrying if things are coming down the line "straight". |
|
|
Persistent variables in script
measurement tools |
An extension of the script
measurement tool, users can carry intermediate results from 1 frame
to another to calculate statistics (e.g. averages) or accumulate
results. For applications like bread cutting or web scanning, these
tools make it easy for users to calculate accumulated measurements
(e.g. volume) from each scanned cross section. |
|
|
Occlusion prevention with two
sensors |
Users can now "see"
every angle of intricate surfaces without fear of occlusions. In
a dual sensor system, occlusion is eliminated by merging data from
the main sensor and buddy sensor to extract data from the best view
of the target's surface in the X & Y directions. By being able
to "see" every aspect of the target, production decisions
can be made more precisely. |
Please contact
Adept
Turnkey for download details for any of the above revisions
|
Adept Turnkey Pty Ltd are "The Machine Vision
and Imaging Specialists" and distributor of LMI Gocator products
in Australia and New Zealand. To find out more about any LMI Gocator
machine vision product please call us at Perth (08) 9242 5411 / Sydney
(02) 9979 2599 / Melbourne (03) 9350 7377 or contact
us online. |
|
|