Enhance image capture performance with NEW, high-speed, GigE camera with
Double Rate technology from Photonfocus
Go
to DR1-D1312-200-G2-8
Go to High Speed Cameras
Go to High-resolution Monochrome Cameras
Go to GigE cameras
Go to Photonfocus
Double-rate GigE, CMOS camera technology up to 25% faster
than CL-base cameras
The
advantages of CMOS technology
Recent advancements in CMOS image sensors has made them a mature technology
with more developing potential than their CCD counterparts.
State-of-the-art CMOS cameras with active pixels are unsurpassed in
terms of their extraordinarily high-dynamic properties, their antiblooming
resistance and their readout speeds (up to 60 MHz per output channel).
Further key advantages are the ability to assess only parts of an
image (ROI) and of integrating functionality on the chip. Their
ability to manage high frame rates take CMOS cameras to the
forefront of high-speed image capture and image analysis. The combination
of CMOS technology's many advantages can drastically reduce the overall
implementation cost of a vision system. |
Introducing
the NEW DR1-D1312-200-G2-8 GigE camera |
Recognising
the requirements for applications needing fast motion-analysis, Photonfocus,
uses a proprietory modulation algorithm to double the maximum
frame rate and incorporates a double
bandwidth for data transmission via the standardised GigE
interface
The Double Rate camera technology, which is based on the standard
implementation of the GigE interface and standard GigE-Vision and
GenICam software protocols, enables standard tools and libraries to
be used in high-speed applications. It overcomes the drawback of link
aggregation and enables frame rates of 577 fps at VGA resolution and
204 fps at 960 x 960 pixels to be achieved in a single GigE connection.
Suitable for single or multiple camera setups, the camera is perfect
for deployment in applications like sports or bio-mechanical analysis,
manufacturing process failure analysis, handling system failure or
break-down of high sped packaging systems - all these applications
needing the high frame rates provided by CMOS technology while the
combination of the GigE interface and the standard software protocol,
GeniCam, eliminates the complications and cost of cameras adopting
the Link aggregation solutions. |
|
|
Comparison
of the bandwidth of different interfaces used in machine vision |
Achieve
better images
In sports analysis applications, near-infra-red markers are often used
to enable data capture and the high quantum efficiency of the sensor used
in the DR1-D1312-200-GB-8 is the key to the good image quality produced
by the camera. For applications working on longer wavelengths (e.g. in
the near infrared area) a specific NIR sensor can be used in the same
camera type.
An added advantage of Photonfocus' technology is the camera's capacity
to save unmodified image formats and use only half the storage space compared
to standard solutions.
Key
benefits and features |
|
|
• No link-aggregation |
• Single-cable system; |
• Network connectivity |
• Multi-camera systems can be created
without limitations |
• Modulation can be disabled, to
transmit original image data |
• 25% faster then conventional CL cameras |
• 100% faster than standard GigE cameras |
• Wide spectral sensitivity for 320nm
to 1030 nm |
• Enhanced near-infra-red sensitivity with the
A1312IE sensor |
• Lower power consumption at high
speeds |
• Global shutter |
• GeniCam software protocols |
Quick
specifications |
DR1-D1312-200-G2-8
GigE |
Sensor |
1.4 MPx 1" CMOS A1312 (IE) Progressive
scan, monochrome |
Resolution |
1312 x 1082 |
Frame rate |
577 fps @ VGA and 135 fps at full resolution |
Pixel size |
8 µm x 8 µm |
Spectral range |
350 nm - 980 nm. A1312 (IE) sensor: 350nm - 1000 nm |
Interface |
GigE |
Power supply |
12 V DC (-10%)... +24 V DC (+10%) |
Operating temperature |
0°C ... +50°C |
Lens mount |
C-mount; CS-mount optional |
Dimensions |
60 x 60 x 59 |
Adept Turnkey Pty Ltd are "The Machine Vision and Imaging
Specialists" and distributor of Photonfocus products in Australia
and New Zealand. To find out more about any Photonfocus machine vision
product please email us at: adept@adept.net.au
or call us at Perth (08) 9242 5411 / Sydney (02) 9979 2599 / Melbourne
(03) 9350 7377 or use our online contact
us page.
|