Phantom ir300: CMOS sensor delivers high-speed, near-IR response
Go
to Phantom ir300
Go to High Speed Cameras
Go to Standard Resolution Monochrome
Cameras
Go to Vision Research
Capturing high-speed
image events not visible to the human eye
Previously not possible with CMOS-based, digital high-speed cameras, the
combination of Vision Research's Phantom v7.3 electronics and a NIR sensitive
CMOS sensor allows the new Phantom ir300 camera to capture image
events in the near IR spectrum in light that is invisible to
humans. The Phantom ir300 captures 800 x 600 pixels at up to 6,688 fps.
While most CMOS sensors rapidly start losing sensitivity above 600nm,
the Phantom ir300 extends that point to 800nm providing
a usable range to about 1100nm. It's sensitivity is aided by the large
size of its 22um pixels.
Added bonus
An added advantage of the Phantom ir300 is that is behaves just like a
v7.3 at wavelengths up to 600nm, making it also a general-purpose
monochrome, digital high-speed camera.
Special features
The Phantom ir300 is packed with a large number of special features among
which are:
** Segment memory for up
to 16 cines in multi-cine mode
** Continuous recording
** Frame rate profile
** Memory gate
** Event marking
** Frame timestamp
** IRIG in/out (modulated
and unmodulated)
Applications for the Phantom ir300
When used with LED lights or lasers in the 850nm wavelength, the Phantom
ir300 is ideal for nocturnal animal studies and human eye studies.
Other deployments include security applications, pulsed
laser targeting applications, PIV, combustion and other uses where light
sources in the 600nm to 1100nm wavelength are used.
The camera can also be used for self-illuminating applications to see
what is happening in wavelengths the human eye can't see.
Key features of the Phantom
if300
|
Sensor |
Extended-response monochrome CMOS sensor
|
Resolution |
800 x 600 full-frame |
Frame rate |
6688 frames-per-second at full resolution; 190
000 fps at reduced resolution (32 x 32) |
Pixel size |
22 µm |
Spectral capacity |
Up to 1100nm |
Bit depth |
8-, 10-, 12-, 14-bit |
Dynamic range |
60 dB |
Memory |
8 GB or 16 GB high-speed memory |
Triggering |
Fully adjustable triggering within recordable
frames software or hardware trigger (TTL) |
Lens |
Nikon f-mount standard, PL, C-, and Canon EOS
available |
Power |
100 - 240 VAC, 90 Watt power supply included. 20 - 36 VDC battery
input via Break-out-Box |
Operating temperature |
Active cooling with dual internal micro-fans;
Operating temperature 0°C - 50°C |
Dimensions |
10.9 (L) x 10.16 (W) x 24.13 (H) cm |
Weight |
3.175 kg. |
* Note: The
Phantom ir300 is not a thermal imaging camera
|
Adept Electronic Solutions are 'The Machine Vision
and Imaging Specialists and distributor for Vision Research products
in Australia and New Zealand. To find out more about the options or
any JAI product, please email us at: adept@adept.net.au,
call us at Perth (08) 92425411 / Sydney (02) 99792599 / Melbourne
(03) 95555621 or use our online contact
us form. |
|
|