AT logo - The Machine Vision Specialists  
  Cameras  
  Frame Grabbers  
  Lenses  
  Lighting  
  Software  
  Vision Systems  
  Accessories  
  News  
  Careers  
  Contact AT  
  Site Map  
Request product information

Contact
info@adeptturnkey.com.au

Perth:
(08) 9242 5411

Sydney:
(02) 9905 5551

Melbourne:
(03) 9384 1775


Defence Recognised Supplier Scheme Logo

 

New 2MegaPixel GigE CCD cameras - JAI TM-2040GE

New 2MegaPixel GigE CCD cameras -

JAI TM-2040GE

JAI's popular and proven range of CCD cameras has a new addition to its GigE series. The TM-2040GE takes the high fidelity front-end circuitry, low noise power supply and high resolution 1" progressive scan IT CCD sensor (KAI-2020) and fits these to the cost savings and flexibility of the new GigE vision serial interface standard.

The new TM-2040GE GigE CCD cameras offer two-megapixels (1600 x 1200) and software selectable operation that allows users to use both single or dual tap modes that produce 17 or 34 frames per second output respectively.

The GigE TM-2040GE CCD cameras produce high resolution 12-bit linear images, or 10-bit/8-bit images that are modifiable by a user-defined look-up table (LUT) for use in difficult lighting situations. It also offers all the standard benefits of the GigE vision serial interface; including up to 100m cable lengths, data rates that are up to 100 MBps and the cost savings/flexibility arising from the use of standard Cat 5E or Cat 6 cabling.

Other features of these high resolution GigE CCD cameras include image center partial scanning (600, 300, or 150 lines), as well as variable partial scanning that provides users with the option of choosing the starting point and the number of lines to be scanned. The lower the number of lines selected the higher the frame rate output. It also offers a defective pixel compensation feature that uses neighboring pixels to adjust for out-of-tolerance pixels.

The TM-2040GE CCD cameras are offered in both monochrome and Bayer CFA colour. The monochrome model enables binning modes which add pixels in horizontal, vertical or both directions for increased sensitivity. With full frame shuttering of up to 1/32,000 secs, asynchronous reset and no-delay pulse width control shuttering, these high resolution CCD cameras can be applied to many applications where very precise triggering, high resolution and speed are required.

Another high performance feature of the TM-2040GE GigE CCD camera is its PIV (Particle Image Velocimetry) mode enabling the very fast capture of pairs of images separated by only a few microseconds for particle motion analysis.

The new TM-2040GE GigE CCD cameras can be widely used in demanding machine vision applications across a diverse range of industries including manufacturing, medical, defence and intelligent transportation.

The standard TM-2040GE GigE CCD cameras have a C-mount lens adapter but are also available with an optional F-mount or M42 mount (P-mount) for use with large format lenses which will reduce vignetting.

Summary of key product features:

  • Square pixels for accurate measures
  • 12-bit A/D for high image fidelity
  • 10-bit/8-bit output modifiable by a built-in look-up table for improved handling of high contrast lighting situations.
  • Binning and partial scan modes for higher-speed operation, including user-definable partial scanning allowing users to define any starting point and any number of scan lines.
  • Pixel compensation technology using neighboring pixels to correct for defective ones, thereby maintaining a cleaner image over a longer camera lifetime.
  • Automatic channel balancing, providing high-speed dual-tap output with maximum image quality
  • A built-in PIV mode able to capture pairs of images a few microseconds apart for advanced studies of movement in fluids or gases.

Machine vision integrators and machine vision users worldwide now have access to a greater range of industrial cameras with JAI's TM-2040 GigE range; that combine high resolution features with the ease-of-use GigE Vision standard interface to deliver a yet once again winning CCD camera.

For more information or to purchase please contact Adept Electronic Solutions at www.adept.net.au Tel Sydney (02) 99792599 Perth (08) 92425411

For more information please contact us.

 

 

If you like this page, please recommend and share it.

Facebook Twitter More