Built with an ultra-small footprint and with screw locks
to ensure safe electrical connections in harsh environments, the Mako
U series of USB3 cameras offer resolutions from
VGA to 5 megapixels and up to 550 fps
(depending on the model).
Every model is powered over the USB interface and has opto-isolated I/Os.
The two non-isolated GPIO lines are TTL-based and programmable as input
or output. This feature provides maximum flexibility for adaptation to
individual application requirements as well as allowing easy operation
of peripheral components.
The Mako U series provides great performance at low cost.
Features |
|
|
• Defect
pixel correction (on/off) |
• Fixed pattern noise
correction (on/off) |
• ROI |
• Gain (manual
control, 0 to 20 dB) |
• Exposure (manual control,
44.2 µs to 1.4 s) |
• Gamma |
• Reverse
X |
• DeviceLinkThroughputLimit
(easy bandwidth control) |
• Sync out modes: Waiting
for a trigger, exposing, readout, • imaging |
• Storable
user sets |
|
|
Applications |
•
Inspection |
• Quality
control |
• Surveillance |
• Industrial
imaging |
• Machine
vision |
|
|
|
|
|
|
|
Model |
Mako U-051B |
|
Sensor |
Type 1/3.6 Progressive-scan-CMOS sensor monochrome |
Resolution |
800 x 600 |
Pixel size |
4.8 µm |
Frame rate |
391 fps |
Interface |
USB3 Vision |
Bid Depth |
8-/10-bit |
Lens mount |
C-Mount, CS-Mount |
Operating temperature |
+5°C to +45°C (housing temperature) |
Power requirements (DC) |
Power over USB3 |
Power consumption (@12V) |
n/a, 2.7 W @ 5 VDC |
Mass |
60 g |
Dimensions (LxWxH) |
49.5 ×
29 × 29 mm, incl. connectors; no tripod or lens |
|
|
Mako U-051B data sheet |
|
|