AT logo - The Machine Vision Specialists  
  Frame Grabbers  
  Vision Systems  
  Contact AT  
  Site Map  
Request product information


(08) 9242 5411

(02) 9905 5551

(03) 9384 1775

Defence Recognised Supplier Scheme Logo


CLHS Frame grabber with Fiber Optic Interface!

Go to Camera Link HS frame grabbers
Go to Teledyne Dalsa Frame Grabbers

  Xtium FX8  

The Xtium FX8 is ideal for maximising transfer rates for high resolutions systems. With two models the Xtium2-CLHS FX8 and Xtium2-CLHS FX8 LC frame grabbers expand on the already established and field proven capabilities of Teledyne Dalsa's Xtium frame grabber family.

These grabbers have a
fiber optic interface that supports the CameraLink HS X-protocol and they slot into PCI Express™ Gen 3.0 slots. Fibre optics allows them to transfer data for up to 300m without loss of speed or data integrity. They are designed with an enhanced memory architecture and align with today's constantly improving imaging technology.

The Xtium2-CLHS features high-performance on-board, DataTransfer Engine (DTE) to deliver maximum bandwidth without the need for specialized motherboards or chipsets. By enabling maximum sustained throughput and ready-to-use image data, the Xtium2-CLHS FX8 minimizes CPU usage and improves processing times for host applications. In addition, the Xtium2 series features enhanced memory bandwidth to meet the ever-increasing image resolution and faster frame rates of today’s camera technology. They feature host transfers of up to 6.8GB/sec and are compatible with
Microsoft Windows 7&10 (32/64-bit), WOW64 and Linux.

The Xtium-CLHS FX8 supports both area scan and line scan cameras acquisition rates of up to 5.0GB/s.

For no extra cost, the Xtium2-CLHS FX8 and Xtium2-CLHS FX8 LC are entirely supported by Sapera LT SDK.

The Xtium2-CLHS FX8 and Xtium2-CLHS FX8 LC are designed for high speed applications like web inspection or high resolution quality inspection on a high speed conveyer line.

About Sapera LT SDK:

Sapera LT SDK is an image acquisition and control software development toolkit (SDK) for Teledyne DALSA'S cameras and frame grabbers.

"Sapera LT SDK supports image acquisition from cameras and frame grabbers based on standards including GigE Vision™, Camera Link®, CoaXPress®, and Camera Link HS™.

Key Features
Xtium2-CLHS FX8
Xtium2-CLHS FX8 LC
Supports up to four CLHS lanes
• Support up to two CLHS lanes
• Aggregate bandwidth of up to 5.0GB/s
• Aggregate bandwidth of up to 2.5GB/s
• Camera Link HS compliant
• Fully supported by Sapera LT SDK
• Host transfers up to 6.8GB/sec
• Fiber cabling using SFP+modules
• Half-length PCI Express Gen 3.0 x8 board

Xtium2-CLHS FX8
• Half-length PCIe x8 card
• PCIe Rev 3.0 compliant
Acquisition Rate
• Up to 5.0GB/s
• Up to 2.5GB/s
Host Transfer
• Up to 6.8 GB/s


• CLHS 1 to 4 lane configurations
• Up to 4 fiber cables
• Support for CLHS acquisition trigger modes 1 through 4

• Up to 2 CLHS lane configurations
• Up to 2 fiber cables
• Support for CLHS acquisition trigger modes 1 through 4

• Horizontal size: 64 bytes to 16 Kbytes
• Vertical size: 1 line to 16 million lines
• 512MB image buffer

Pixel Format
• Mono8, Mono10, Mono12 and Mono16
• RGB 8; RGB+Y 8-bit/color/pixel

• 4x SFP+cages with latch
• DH60-27P for Board Trigger, Strobe and General I/Os (main bracket)
• 16-pin connector on the board for Board Sync and/or other usage
10°C - 50°C
Dimensions (LxH)
11.11cm x 9.96cm

Click here to Download the Xtium2-CLHS FX8 datasheet

Click here to Download the Xtium2-CLHS FX8 LC datasheet

Need a price or more application information? Please email Adept Turnkey or call our offices

Adept Turnkey Pty Ltd is"The Machine Vision and Imaging Specialists" and distributor of LMI Technologies products in Australia and New Zealand.
To find out more about any Teledyne DALSA product, please call Adept Turnkey at Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or contact us online.




If you like this page, please recommend and share it.

Google+ Facebook Twitter More