AT logo - The Machine Vision Specialists  
  Frame Grabbers  
  Vision Systems  
  Contact AT  
  Site Map  
Request product information


(08) 9242 5411

(02) 9905 5551

(03) 9384 1775

Defence Recognised Supplier Scheme Logo


High speeds and industrial strength at a compelling price point

Go to High speed cameras
Go to Teledyne DALSA
Go to GigE cameras
Go to Ultra-high-resolution Colour cameras

Genie Nano-5GE

With extreme speeds, the Genie Nano 5GE from Teledyne Dalsa is perfect for imaging applications where high speed data transfer is fundamental.
A prominent feature of the Genie Nano 5GE is that by combining it with a turbo drive you'll get the same throughput as 10GE without the associated high cost of ownership.

The Genie Nano 5GE comes equipped with CMOS sensors and despite being comparatively small (LxWxH: 32 mm x 44 mm x 59 m) to similar models, an operating temperature that ranges from -20 to +65ºC and an all metal body suggests it's built to last.

In addition, these cameras use fieldproven Sapera LT software featuring CamExpert as well as being available in multiple resolutions ranging from 3.2MP to 12MP, with fast frame rates from 190 to 63 fps.

Key features

• 5 GigE Ethernet port & hardware

• With a screw mount RJ-45 connector, it's built to withstand industrial enviornments

• Equipped with Sapera LT software featuring CamExpert

• Supports long cable lengths (up to 100m)

Typical Applications:

• Electronics manufacturing inspection

• Industrial metrology

• Intelligent traffic systems

Specifications Nano-5G-M2050 Nano-5G-C2050 Nano-5G-M2450 Nano-5G-C2450 Nano-5G-M4060 Nano-5G-C4060 Nano-5G-M4040 Nano-5G-C4040
Resolution 2064 x 1544 2064 x 1544 2464 x 2056 2464 x 2056 4112 x 2176 4112 x 2176 4112 x 3008 4112 x 3008
Frame rate 190 fps 190 fps 141 fps 141 fps 88 fps 88 fps 63 fps 63 fps
Max image circle 1/1.8" 1/1.8" 2/3” 2/3” 1" 1" 1.1” 1.1”
Data Format 8-Bit Mono 8-Bit Raw Bayer 8-Bit Mono 8-Bit Raw Bayer 8-Bit Mono 8-Bit Raw Bayer 8-Bit Mono 8-Bit Raw Bayer
Dynamic range 76.46 dB
Pixel size 3.45 µm
Operating temp -20 to +65ºC (housing temperature)
Mass 124 g
Lens mount C-Mount
Size (L x H x W) 32 mm x 44 mm x 59 mm (no lens adapter)
Data output transfer Gigabit Ethernet (1Gbps, 2.5Gbps or 5Gbps — auto-negotiate)

Need a price or more application information? Please email Adept Turnkey or call our offices

Adept Turnkey Pty Ltd is"The Machine Vision and Imaging Specialists" and distributor of iDS products in Australia and New Zealand.
To find out more about any Teledyne DALSA product, please call Adept Turnkey at Perth (08) 9242 5411 / Sydney (02) 9905 5551 / Melbourne (03) 9384 1775 or contact us online.




If you like this page, please recommend and share it.

Google+ Facebook Twitter More