PP 600 Machine Vision Lighting Controller

 

The PP 600 machine vision controller range provides repeatable intensity control of LED lighting for machine vision applications. Available from Adept Electronic Solutions in Australia and New Zealand the PP 600 machine vision lighting controllers are high quality lighting controllers for countless machine vision lighting applications.

The PP 600 machine vision lighting controller includes all the intensity control, timing and triggering functions required for machine vision systems. The PP 600 can be configured to provide constant or pulsed output, with control over the delay, intensity and duration. Intensity and pulsing can be triggered by digital inputs.

Three modes of operation are provided separately for each channel. "Continuous" provides an output with a continuous current, "Strobed" is pulsed once per trigger and "Selected" changes according to digital inputs

• Two Channel, 10Amp
• Easy Push-Button Set Up
• Non-volatile Standalone Operation
• Strobed or Continuous Output
• Isolated Digital Inputs

In selected mode the output can be selected from up to four values using one or both digital inputs. In pulsed mode one input is used as a trigger; the delay and pulse duration can range from 20us to 1 second in 20us or 2ms steps.

The PP600 machine vision lighting controller is set up using four push buttons and a four digit display. The setup is saved in non-volatile memory so that the PP600 will resume operation after a power cycle.

Applications include lighting systems requiring brightness changes, easy and repeatable set up of lighting levels, strobe control of lighting and synchronising lighting switching to camera syncs.

PP 600 lighting controller specifications:

• Two constant current outputs
• Two opto isolated (5 - 24 V) digital inputs
• Total output 4 A constant or 10 A pulsed at 12 to 24 V
• Unregulated DC supply required at least 1 V above output voltage
• DIN rail or panel mounting
• 115 mm long by 76 mm wide by 27 mm high (excluding DIN fixing)

For more information please contact us.