CX Frame Grabber Family
Back to Analogue Frame Grabbers
Back to Imagenation Frame Grabbers

• Bus ­ 8 bit ISA. PC/104 has full 16 bit connectors for placement anywhere in a PC/104 stack
• Input and output composite video format ­ Monochrome, RS-170 (NTSC) or CCIR (PAL)
• Resolution ­ RS-170: High, 512 x 486 pixels; Low, 256 x 243 pixels; CCIR: High, 512 x 512 pixels; Low, 256 x 256 pixels; 256 gray levels, 8 bit
• Memory ­ 256 Kbytes of memory mapped, dual port video RAM
• Camera power ­ + 12 VDC output
• Supported Operating systems - Support for DOS, Win 3.1, Win 95 / 98 / ME, Win NT / 2000
• Supported Languages ­ C / C++, Visual Basic

• Sampling jitter ­ Maximum of ± 3 ns relative to horizontal synchronization
• Video RAM base address ­ ISA and PC/104: software selectable segment address of 8000 through F000 (hex)
• Software programmable look up tables (LUTs) ­ 256 byte input LUT and 256 byte output LUT
• Video output (display) ­ Monochrome composite 1 V peak to peak, 75 W with optional 4-bit non-destructive overlay
• External trigger ­ Input pulled up by 10k ohm to 5V, trigger requires a TTL pulse of 100 ns (minimum): software programmable edge or level sensitivity; software programmable polarity
• Strobe output ­ Single TTL level output is provided to control resettable cameras, strobe lights, etc.
• Video noise ­ < 0.7 LSB (least significant bit); -51 dB signal to noise before digitization
• Offset and gain ­ Software programmable
• Works with resettable cameras
• VCR compatible
• Software and manual included

Specific to Individual CX Family Members

	CX-100-10	CX-100-30	CX-104-00	CX-104-20
Form Factor	ISA	ISA	PC/104	PC/104