AT logo - The Machine Vision Specialists  
  Cameras  
  Frame Grabbers  
  Lenses  
  Lighting  
  Software  
  Vision Systems  
  Accessories  
  News  
  Careers  
  Contact AT  
  Site Map  
Request More Product Information

Contact us
info@adeptturnkey.com.au

Perth:
(08) 9242 5411

Sydney:
(02) 9905 5551

Melbourne:
(03) 9384 1775

Automated Imaging Association (AIA) Seal

Defence Recognised Supplier Scheme Logo
 
SG-14-04K80
Go to Teledyne Dalsa Cameras
Go to Line Scan Cameras
Go to GigE Cameras
Spyders series GigE dualine/bilinear cameras

Incorporating Teledyne DALSA’s latest line scan technology, the monochrome Spyder3 GigE surpasses its predecessor, the Spyder2, with three times more responsivity while maintaining the same dynamic range.

Fully programmable, the Spyder3 offers precise control over key performance variables such as gain and offset.

In addition to its high performance and affordability, Spyder3 GigE also incorporates advanced features such as flat field correction and CDS (Correlated Double Sampling). A GUI is provided allowing users to begin imaging in minutes.

For those OEMs migrating from the Spyder or Spyder2, the Spyder3 GigE does not require a new optics design because pixel size and fill factor remain unchanged at 14 µm and 100% respectively. Also, with a GigE interface, a frame grabber is no longer needed resulting in significant system cost savings.

Other features and benefits    
• Broadband responsivity up to 408 DN(nJ/cm2) @ 10 dB gain • Gigabit Ethernet interface, GigE Vision compliant • Graphical user interface
• Selectable high or low sensitivity mode • Horizontal binning, vertical binning as Tall Pixel Mode • Flat field correction
• RoHS compliant NEW Higher operating temperature (65°C) NEW Improved graphic user interface for easier setup
NEW Support for Sapera vision software • Pre-calibrated light sources • Antiblooming and exposure control
• RGB, RG/BG, or G output formats (SG-34 Colour models) • Programmable gain, offset, line rates, trigger mode, test pattern output, and camera diagnostics

Typical applications    
• FPD inspection • Postal sorting • Wood/tile/steel inspection • 100% print inspection
• Food inspection • Web inspection • Container inspection • Pick-and-place
• Glass bottle inspection • Industrial metrology • General machine vision  

 

Model Spyder3 SG-14-04K80
Resolution
4096 x 2
Max. Line Rate
18.5 kHz
Data Format
8- or 12-bit; user selectable
Pixel Size
10µm
Video Output
GigE Vision
Dynamic Range
Up to 1400 : 1
Responsivity Up to 2064 DN / (nJ/cm²) @ 0 dB, 12 bit
Gain
± 10dB
Lens Mount
M42 x 1
Operating Temp
0 °C to 65 °C (New!)
Power
< 9 W
Dimensions
72 mm x 60 mm x 65 mm
Weight <300g

Teledyne DALSA Spyder3 SG-14-04K80 Data sheet

 

 

 

If you like this page, please recommend and share it.

Facebook Twitter More